Remote Control Battery Installation

1Remove the battery compartment cover.

2Load two fresh “AAA” batteries into the battery compartment. Make sure the batteries are inserted properly, matching polarity

by referring to the symbols “+ -” marked in the battery compartment.

3Close the battery compartment cover.

•When replacing batteries, replace both of them. Do not mix new and used batteries together as battery life will be shortened.

Point the remote control unit no more than 20 feet from the remote sensor and within 30º from the front of the unit.

•The operating distance may vary depending on the brightness in the room.

Note:

•Do not point bright lights towards the remote control signal sensor.

•Do not place objects between the remote control unit and the remote signal sensor.

•Do not use the remote control unit while operating other units at the same time.

Remote Sensor

30º