SETTING THE VIDEO CHANNEL
To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel).
When a TV is connected with the 75 ohm coaxial cable only.
1 Press the POWER button to turn the VCR on. |
2Press the TRACKING SET + or – button to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press the ENTER button.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
ENGLISH
2 | Set the 3/4 Channel selector switch (Rear of the |
| VCR) to CH 3 or 4. |
3 | Turn ON the TV and set to CH 3 or 4 to correspond |
| with the channel selected in step 2. |
4 | Press the TV/VCR selector button to select VCR. |
| The TV/VCR indicator will light. |
5 Select any channel to receive | CH 125 |
a TV station in your area. The channel number will appear on the screen for about 4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/ 4 channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to
3Press the MENU button until the menu screen is cleared.
SETTING THE CLOCK
You must set the date and time manually for timer recordings.
EXAMPLE: Setting the clock to "8:30 AM" October, 26th (FRI), 2001.
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Press the POWER button to turn the VCR on.
•Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the TV and this VCR on, and select the video input mode on the TV.
your TV owner's manual for details.
LANGUAGE SELECTION
This VCR can display on the TV screen in the English, Spanish or French language.
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Press the POWER button to turn the VCR on.
•Press the TV/VCR selector button to select the VCR mode.
1Press the MENU button. Press the TRACKING SET + or – button to select the CLOCK SET option, then press the ENTER button.
2Press the TRACKING SET + or
– button to set the month, then press the ENTER button.
3Set the day, year and time as in Step 2.
• The day of the week will automatically appear when you set the year.
• Press and hold down the button to increase/ decrease the minute by 10.
• After setting the clock, date and time starts functioning automatically.
MENU |
|
|
CLOCK SET |
|
|
TIMER REC SET |
|
|
AUTO REPEAT | ON | OFF |
CH SET UP | ON | OFF |
SAP |
LANGUAGE/IDIOMA/LANGUE 
NO NOISE BACKGROUND
〈+/–/ENTER/MENU〉 ON OFF
MONTH | 10 |
DAY | 1 (SUN) |
YEAR | 2000 |
TIME | 12 : 00 AM |
MONTH | 10 |
DAY | 26 (FRI) |
YEAR | 2001 |
TIME | 8 : 30 AM |
When a TV is connected with an audio/video cable, turn the TV and this VCR on and select the video input mode on the TV.
1 Press the MENU button. |
| CLOCK SET |
|
| ||
|
|
|
| MENU |
|
|
Press the TRACKING SET + |
| TIMER REC SET |
|
| ||
|
|
| ||||
|
|
|
|
|
| |
or – button to select the |
|
| AUTO REPEAT | ON | OFF | |
|
| |||||
|
| CH SET UP | ON | OFF | ||
|
| SAP | ||||
|
| |||||
LANGUAGE option, then |
|
|
| LANGUAGE/IDIOMA/LANGUE | ||
|
|
| ||||
|
|
| NO NOISE BACKGROUND | |||
|
|
| ||||
press the ENTER button. | ||||||
NOTES: • After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the present time.
• Press the CANCEL button to move cursor backward for correction.
• If you want to correct time or date while the clock is functioning, press the MENU button, then press TRACKING SET + or – button to select the CLOCK SET option, then press the ENTER button.
To make any adjustments perform steps 2
through 3.
15
4F21301A E | 15 | 6/26/02, 3:53 PM |