REAR
3132
ENGLISH
OUT | UHF/VHF | |
IN(ANT) | ||
| ||
VIDEO |
| |
L |
| |
AUDIO | OUT(TV) | |
R CH |
| |
3 | 4 |
35 | 34 | 33 |
14.AUDIO (L/R)/VIDEO In Jacks - Audio and video signal cables from an external source can be connected here.
15.Direct Channel Selection buttons
16.STOP button - Press to stop the tape.
17.MENU button - Press to display the
18.TRACKING SET + / – buttons - During playback, they are used to adjust tracking manually. Used to set or adjust in the menu mode.
19.TIMER REC button - Used to set the VCR to start recording at a preset time (Timer program must be set).
20.SLOW button - Press to play back a tape in slow motion or to advance the tape one frame at a time during still playback.
21.COUNTER RESET button - Resets the Real Time Tape Counter to 00:00:00.
22.TV/VCR selector button - Switches between TV and VCR.
23.SPEED (SP/SLP) selector button - Sets the tape speed for recording.
24.PAUSE/STILL button - During recording, this
button temporarily stops the tape. The "
" will appear on the screen. During playback, it stops the
tape and displays a still image on the TV screen.
25.ENTER button - Used to enter the information in the menu mode.
26.CANCEL button - Used to clear the selected timer recording program.
27.AUTO TRACKING button - Allows automatic adjust- ment of tracking to minimize picture noise during play- back.
28.INPUT SELECT button - Switches the program for viewing between the VCR and external input sources.
29.AUDIO SELECT button - Switches sound between mono and stereo, and SAP when receiving broad- casts in stereo or SAP.
30.CALL button - Displays the present time/day of the week, channel, counter, speed selection and VCR mode on the TV screen.
31.AUDIO (L/R) / VIDEO OUT Jacks - Use to output audio and video signal to a TV, amplifier or VCR.
32.UHF/VHF IN (ANT) Jack - Connect a UHF/VHF antenna or CATV cable to this jack.
33.UHF/VHF OUT (TV) Jack - Use to output UHF/VHF or CATV signal to a TV.
34.3/4 Channel Selector Switch - Selects the channel through which the VCR outputs its signal to a TV.
35.AC Power Cord - Connect to a 120V 60Hz outlet.
9
4F21301A E | 9 | 6/26/02, 3:52 PM |