SPECIAL PLAYBACK
TO VISUALLY SEARCH FOR
DESIRED POINTS
When either the F.FWD or REW button is pressed in the PLAYBACK mode, the speed search picture will appear. When pressed twice, the search picture will increase speed. Speed search time depends upon the speed used (SP, LP or SLP) during recording.
TO WATCH A STILL PICTURE
TO WATCH A TAPE REPEATEDLY
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Press the POWER button to turn the VCR on.
•Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the TV and this VCR on, and select the video input mode on the TV.
Press the PAUSE/STILL button in the PLAYBACK mode. Press the PAUSE/STILL button again to resume normal playback.
FRAME BY FRAME ADVANCE
Press the SLOW button during STILL playback. The still picture will advance by one frame each time you press the button. Hold the button for continuous frame by frame viewing.
Press the PAUSE/STILL button again to resume normal playback.
1Press the MENU button. Press the TRACKING SET + or – button to select the AUTO REPEAT option.
2Press the ENTER button to select the ON position.
3Press the MENU button.
If you press the PLAY button, the tape will play over and over until the repeat mode is canceled.
MENU |
|
|
CLOCK SET |
|
|
TIMER REC SET |
|
|
AUTO REPEAT | ON | OFF |
CH SET UP | ON | OFF |
SAP |
LANGUAGE/IDIOMA/LANGUE 
NO NOISE BACKGROUND
OFF | |||
| MENU |
|
|
| CLOCK SET |
|
|
|
|
| |
| TIMER REC SET |
|
|
|
|
| |
| AUTO REPEAT | ON | OFF |
| |||
| CH SET UP | ON | OFF |
| SAP | ||
| |||
LANGUAGE/IDIOMA/LANGUE 
NO NOISE BACKGROUND
NOTES: • A few noise bars will appear on the picture during SPEED SEARCH and STILL.
•The audio output is muted during SPEED SEARCH, STILL, FRAME ADVANCE and
SLOW MOTION.
•To prevent damage to the tape, special playback is automatically changed to the PLAYBACK mode after 5 minutes.
" 
" will appear if you press the CALL button.
To remove the 
on the screen, press the CALL button again.
NOTE: To cancel repeat mode, follow the above steps 1 and 2, then press the ENTER button to select the OFF position. Press the MENU button to return to the TV.
SLOW MOTION PLAYBACK
Press the SLOW button in the PLAYBACK mode. Playback will proceed at 1/10th of the normal speed. Press the PLAY button again to resume normal playback.
NOTE: SLOW TRACKING AND VERTICAL LOCK ADJUSTMENT
If noise bars appear in the picture during slow motion, press the TRACKING SET + or – button to reduce the noise bars.
If the still picture jitters excessively, press the TRACKING SET + or – button to stabilize the still picture.
TAPE SPEED AND RECORDING/PLAYBACK TIME
You can select the two different tape speed before recording.
| VIDEO CASSETTE TAPE | ||
|
|
| |
TAPE SPEED | T120 | T160 | |
SP | 2 hours | ||
Standard Play | |||
|
| ||
|
|
| |
SLP | 6 hours | 8 hours | |
Super Long Play | |||
|
| ||
This VCR selects the playback tape speed SP, LP(Long Play) or SLP automatically.
18
RECORDING A TV
PROGRAM
RECORDING AND VIEWING THE SAME TV PROGRAM
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Press the POWER button to turn the VCR on.
•Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the TV and this VCR on and select the video input mode on the TV.
1 Load a cassette tape with the erase prevention tab intact. The VCR will automatically turn on.
2 Press the SPEED selector button to select the desired tape speed SP or SLP.
The counter and SP or SLP will appear on the screen for about 4 seconds.
00 : 00 : 00 SP
4F21301A E | 18 | 6/26/02, 3:53 PM |