Memorex MLT2022 manual Feature Setup

Page 21

SETTING THE MENU (CONTINUED)

FEATURE SETUP

1

2

3

4

 

Make sure the main power switch is on as shown on page 14, then press the POWER button 1 to turn on the TV; the POWER indicator will light green. Press the ENTER/MENU button 2; the Video Menu screen will appear. Press the CHANNEL UP 3 or DOWN 4 button to select FEATURE, then press the ENTER/MENU button 2 to select it.

4 2

13

5

 

Press the CHANNEL/Navigation UP 1 or DOWN 2 button to select COLOR MODE, then press the ENTER/MENU button 5 to select it. At the next screen, Color Temp will be selected. Adjust the overall “Color Temp” to User, Cool, Normal or Warm using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button.

4 2

13

5

 

You can also adjust each color temperature separately by selecting the desired color using the CHANNEL/Navigation UP 1 or DOWN 2 button, then adjusting the setting using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button. Press the ENTER/MENU button 5 to confirm the setting.

3 1

2

When done, select RETURN using the CHANNEL/Navigation UP 1 or DOWN 2 button and press the ENTER/MENU button 3.

4 213

Press the CHANNEL/Navigation UP 1 or DOWN 2 button until 3D NR is selected. Set the desired 3D noise reduction setting (0-3) using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button.

NOTE: This setting is not be available for PC(VGA) mode.

20

4 213

Press the CHANNEL/Navigation UP 1 or DOWN 2 button until ASPECT RATIO is selected. Set the aspect ratio (Full, Letter Box, LB to Full, Zoom out, Zoom In 1 or Zoom In 2) using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button.

NOTES:

This setting is not available for PC (VGA) mode.

• For Component (YPbPr) mode, the Letter Box and Zoom out selection will not be available.

Image 21
Contents User’s Guide Contents FCC Notice Important Safety InstructionsFCC Warning Surge ProtectorsAccessories CleaningPower Sources POWER-CORD ProtectionReplacement Parts Power LinesSafety Check Damage Requiring ServicePower Source Location of ControlsFront Remote Rear PanelBattery Installation Remote ControlEffective Distance of the Remote Control Transmitter Battery PrecautionsFor Subscribers to Scrambled Cable TV Service or Satellite For Subscribers to Basic Cable TV ServiceFaqs Cable CATV/SATELLITE ConnectionsOutdoor Antenna Connections Connection Using AUDIO/VIDEO Cables Connection Using Coaxial CableFAQ VCR ConnectionsConnection Using S-VIDEO Cable Cables not Included DVD ConnectionsComputer Connection Connection Using Component CablesSetting the Menu Turning the Main Power onSetting the Video Press the CHANNEL/Navigation UP 1 or Down 2 button On the Next Image SetupSetting the Menu Image Setup Mono Audio SetupSetting the Menu Audio Setup Feature Setup TV Setup Setting the Menu Feature SetupHow many channels will I actually receive? Setting the System and Setting the Channels Into MemoryAdding and Skipping Channels TV Operation Mute Sleep TimerTV/VIDEO MTSTheme InfoFreeze BrightClosed Captions What is Closed CAPTIONING?Closed Captioning with a VCR To View Closed CaptionsChip SET-UP Setting V-CHIPMpaa Rating SET-UP Setting Parental ControlTV Rating SET-UP Changing the Password Symptom Possible Cause Possible Solution Power Troubleshooting GuideRemote Control TV Broadcast ReceptionReception Disturbances Specifications Care and Maintenance Memcorp, Inc Weston, FL