Setting the Menu Image Setup | Memorex MLT2022 specs

SETTING THE MENU (CONTINUED) IMAGE SETUP (CONTINUED)

4 2153

Press the CHANNEL/Navigation UP 1 or DOWN 2 button until SMART THEME is selected. Set the desired Smart Theme (User, Standard, Rich, MultiMedia, Nature or Soft) using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button. Note: You can also directly press the THEME button 5 (on the remote) to select the desired Smart Theme. The setting is not available for PC(VGA) mode.

4	5	1	3	Smart Theme	Multimedia
	2			H-Position
				V-Position
				Phase
				Clock
				Auto Adjust

Press the CHANNEL/Navigation UP 1 or DOWN 2 button until H-Position is selected. Adjust the window's horizontal position using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button. When done, press the ENTER/MENU button 5.

NOTE: The H-Position setting is for PC(VGA) mode only.

	5	13	Smart Theme	Multimedia
			H-Position
4			V-Position
			Phase
			Clock
	2		Auto Adjust

Press the CHANNEL/Navigation UP 1 or DOWN 2 button until V-Position is selected. Adjust the window's Vertical position using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button. When done, press the ENTER/MENU button 5.

NOTE: The V-Position setting is for PC(VGA) mode only.

5	1		Smart Theme	Multimedia
4 2			H-Position
		3	V-Position
			Phase
			Clock
			Auto Adjust

Press the CHANNEL/Navigation UP 1 or DOWN 2 button until Phase is selected. set the desired phase using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button. When done, press the ENTER/MENU button 5.

NOTE: The PHASE setting is for PC(VGA) mode only.

	Smart Theme	Multimedia
	H-Position
	V-Position
5	Phase
5	Clock
4 2	Clock
4 2	13
	Auto Adjust

Press the CHANNEL/Navigation UP 1 or DOWN 2 button until Clock is selected. Adjust the window's width using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button. When done, press the ENTER/MENU button 5.

NOTE: The Clock setting is for PC(VGA) mode only.

		Smart Theme	Multimedia
		H-Position
		V-Position
	2	Phase
3	1	Clock
3	1	Auto Adjust

Press the CHANNEL/Navigation UP 1 or DOWN 2 button until Auto Adjust is selected. Press the ENTER/MENU button 3, then the unit will automatically adjust the PC window to fully fit with the display screen.

NOTE: The Auto Adjust setting is for PC(VGA) mode only.

TO EXIT THE MENU, press the CHANNEL/Navigation UP or DOWN button until RETURN is selected, then press the ENTER/MENU button to select another menu option. You can also press the FREEZE/EXIT MENU button to exit the menus completely at any time.