Overview of Control Features | Hughes & Kettner Matrix 100 guide

MATRIX™ 100 Manual

MATRIX™100

Combo/Head

Front

MATRIX™100

Combo

Rear

25 26 27 28 29 30 31 32

MATRIX™100 Head Rear

1	Overview of Control Features and
	Connectors

1.1 Selecting channels and effect parameters

Use buttons 1 to 4 to select the MATRIX™ 100’s four channels, CLEAN, CRUNCH, LEAD and WARP. These buttons correspond to the buttons on the included footswitch. When the footswitch is connected, buttons 1 to 4 serve display purposes only, and the footswitch switches channels.

Use knobs 5 to 8 to adjust the effect for the given channel. The FX MATRIX’s Autostore function automatically saves the edited effect settings for every channel. You do not need to store settings separately. Even if the amp is suddenly switched off or power fails, the FX MATRIX™ will recall your settings.

1.2Instrument inputs, channels and master volume

Connect your guitar to input 9. Please use high-quality shielded cords only.

Use knobs 10 to 21 to shape the sound and determine the volume of individual channels. You’ll ﬁnd a detailed description of the channels in section 2. Knob 22 determines the amp’s overall volume level. Always turn the MASTER knob all the way down – that is, counterclockwise as far as it will go - before powering your amp up.

Knobs 10 to 22 work in the same tried-and-true manner as the controls on a classic amp. These settings are not stored.

This means that the actual position of the knob determines the amp’s sounds.

1.3 Mains switch and mains socket

Use switch 23 to turn the MATRIX™ 100 on and off. Make a habit of checking to make sure that the switch is set to the OFF position before you connect the power cable to a mains power supply. The MATRIX™ 100 ships with a separate power cord that connects to socket 24. Please ensure that the mains voltage matches the value indicated on the back panel of the MATRIX™ 100. Get in touch with your Hughes & Kettner® dealer immediately if this is not the case or the included mains cord’s plug does not ﬁt into the wall outlet.

1.4 Speaker out

Use jack or jack pair 25, EXTERNAL SPEAKER or SPEAKERS, to connect speakers. All speakers are connected in parallel for both the combo and the head.

MATRIX™ 100 COMBO

EXTERNAL SPEAKER: Connect cabinets with 8 ohms minimum impedance to this jack. The impedance of connected speakers must never be lower than 8 ohms!

MATRIX™ 100 HEAD

SPEAKERS: You can connect two cabinets to the head. The minimum impedance is 4 ohms; ensure your rig’s impedance never drops below 4 ohms! If you plug cabs into both jacks, each cabinet’s impedance must be 8 ohms or higher. If you

english

Matrix 100 specifications

The Hughes & Kettner Matrix 100 represents a significant advancement in guitar amplification technology, designed to meet the needs of modern musicians who demand flexibility, power, and exceptional sound quality. With a robust 100-watt output, this amplifier is ideal for both live performances and studio recording, providing the headroom and dynamic range that guitarists crave.

One of the standout features of the Matrix 100 is its innovative cabinet design that enhances tonal clarity and projection. The cabinet is built to reduce unwanted resonance while maximizing the reproduction of high frequencies, ensuring that every note shines through, whether playing rhythms or intricate solos. This is achieved through a combination of premium components and meticulous engineering, setting it apart from conventional amplifiers.

At the heart of the Matrix 100 lies Hughes & Kettner's proprietary Red Box technology. This feature allows guitarists to directly connect to a PA system or audio interface without sacrificing tone. The speaker-emulated output ensures that the sound remains rich and full, making it an invaluable tool for recording and live sound reinforcement. This technology also eliminates the need for a microphone on the amplifier, simplifying setups and minimizing potential technical issues.

The Matrix 100 boasts a fully programmable preset system, giving musicians the ability to store and recall their favorite tones at the touch of a button. This is particularly advantageous for performers who need to switch between various sound profiles quickly during a live performance. The interface is user-friendly, allowing for seamless navigation through the different channels and effects.

Equipped with an array of built-in effects such as reverb, delay, and modulation, the Matrix 100 allows for an extensive palette of sounds, catering to various musical genres. The quality of these effects is on par with dedicated pedal boards, making the Matrix 100 a versatile solution for the discerning guitarist.

Moreover, Hughes & Kettner has incorporated advanced digital processing technology within the Matrix 100, enabling meticulous control over EQ settings and sound shaping. Guitarists can fine-tune their sound to suit their playing style, ensuring that their unique voice is always conveyed accurately.

In summary, the Hughes & Kettner Matrix 100 is a powerful and versatile amplifier that combines cutting-edge technology with user-friendly features. Its impressive output, advanced speaker emulation, and programmable presets make it an exceptional choice for guitarists seeking performance without compromise. Whether on stage or in the studio, the Matrix 100 delivers a professional sound that is sure to inspire creativity and elevate any musical endeavor.