Options
Installation Settings
Tune in Satellite Signal.
This option allows you to see the strength of the signal your antenna is receiving.
Set Remote Control
Address. This option allows you to control up to four receivers in a centralized area with one or more remote controls. Each receiver requires a separate address. The default address is 0000.
On the front panel of your receiver press the Menu button to bring up the Menu screen.
•Choose Options.
•Choose option 6 (Change System Settings).
•Choose option 3 (Installation Settings).
•On the Installation Settings menu, choose option 2 (Set Remote Control Address). Now follow the instructions on the Remote Control Address screen.
•If you have four receivers, you will have to change the addresses on three of them: they will have address of 0000, 0001, 0002, and 0003.
To program your remote control for each receiver, hold down the SAT key on the remote control until the light flashes. Once the light begins to flash enter the desired address (0000, 0001, 0002, or 0003).
System Status
This is a
Trip Counter. Trip Counter displays the number of message updates from your service provider.
DSR205 User Guide | 45 |