Memorex MVR4041 owner manual Setting the Video Channel, Language Selection, Setting the Clock

〈+/–/ENTER/CANCEL/MENU〉

SETTING THE VIDEO CHANNEL

To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel).

When a TV is connected with the 75 ohm coaxial cable only.

1 Turn ON the VCR POWER button.

2Press the TRACKING/SET + or – button to select the desired language: English (ENGLISH), Spanish (ESPAÑ OL) or French (FRANCAIS), then press the ENTER button.

LANGUAGE/IDIOMA/LANGUE

ENGLISH

ESPAÑ OL

FRANCAIS

〈+/–/ENTER/MENU〉

ENGLISH

2	Set the 3/4 Channel selector switch (Rear of the
	VCR) to CH 3 or 4.
3	Turn ON the TV and set to CH 3 or 4 to correspond
	with the channel selected in 2.
4	Press the TV/VCR selector button to select the VCR
	position.
	The VCR indicator will light in the display.

5 Select any channel to receive CH 125

a TV station in your area. The channel number will appear on the screen and display for about 4 seconds.

For a push-button TV tuner

If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/ 4 channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to your TV owner's manual for details.

LANGUAGE SELECTION

This VCR can display on the TV screen in the English, Spanish or French languages. On-screen language selection (step 2) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options.

CHECK BEFORE YOU BEGIN

•Turn ON the TV and set to the video channel 3 or 4.

•Turn ON the VCR POWER button.

•Press the TV/VCR selector button to select the VCR mode.

When a TV is connected with an audio/video cable, turn the TV and this VCR on and select the video input mode on the TV.

1 Press the MENU button.		CLOCK SET
		MENU
Press the TRACKING/SET +		TIMER REC SET
or – button to select the		AUTO REPEAT	ON	OFF
		CH SET UP	ON	OFF
		SAP
LANGUAGE option, then		LANGUAGE/IDIOMA/LANGUE
		NO NOISE BACKGROUND
press the ENTER button.	〈+/–/ENTER/MENU〉		ON	OFF

3Press the MENU button until the menu screen is cleared.

SETTING THE CLOCK

You must set the date and time manually for timer recordings.

EXAMPLE: Setting the clock to "8:30 AM" March, 23 (FRI), 2001.

CHECK BEFORE YOU BEGIN

•Turn ON the TV and set to the video channel 3 or 4.

•Turn ON the VCR POWER button.

•Press the TV/VCR selector button to select the VCR mode.

When a TV is connected with an audio/video cable, turn the TV and this VCR on, and select the video input mode on the TV.

1 Press the MENU button. Press		MENU
the TRACKING/SET + or –		CLOCK SET
		TIMER REC SET
button to select the CLOCK SET		AUTO REPEAT ON		OFF
		CH SET UP	ON	OFF
option, then press the ENTER		SAP
		LANGUAGE/IDIOMA/LANGUE
button.		NO NOISE BACKGROUND
	〈+/–/ENTER/MENU〉ON			OFF
2 Press the TRACKING/SET + or
– button to set the month, then		MONTH	3
press the ENTER button.		DAY	1 (WED)
3 Set the day, year and time as in		YEAR	2000
		TIME	12 : 00 AM
Step 2.
		+/–/ENTER/CANCEL/MENU
• The day of the week will
automatically appear when
you set the year.		MONTH	3
• Press and hold down the		DAY	23 (FRI)
button to increase/ decrease		YEAR	2001
the minute by 10.		TIME	8 : 30 AM

• Auto date and time start functioning when you finish setting.

NOTES: •After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the present time.

•Press the CANCEL button to move cursor backward for correction.

•If you want to correct time or date while the clock is functioning, press the MENU button, then press TRACKING/SET + or – button to select the CLOCK SET option, then press the ENTER button.

To make any adjustments perform steps 2

through 3.

15

4E40401A E P14-19 15 4/1/01, 5:03 PM