Memorex MVR4041 Stereo Recording and Playback, Separate Audio Program SAP, Using Zero Return

STEREO RECORDING AND PLAYBACK

RECORDING STEREO BROADCASTS

The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts.

When a MTS STEREO

broadcast is received, the STEREO STEREO will appear on the

screen and the program can be viewed or recorded in stereo (refer to pages 18 and 19 for recording procedures).

The Hi-Fi STEREO recording procedure is the same as for normal recordings.

NOTE: When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case the word "STEREO" will not appear and the sound will be in mono.

OUTPUT SELECTION

When viewing an MTS STEREO TV program, or playing a prerecorded VHS Hi-Fi STEREO videotape, press AUDIO SELECT button to select that the audio be heard through both speakers. Normally set to the Hi-Fi STEREO position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The "R" and "L" positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below.

OUTPUT	SOUND HEARD ON BOTH
SELECTION	SPEAKERS
STEREO	STEREO
L CH	LEFT CHANNEL AUDIO
R CH	RIGHT CHANNEL AUDIO
MONO	MONO

NOTES: •When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automati- cally be monaural.

•When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cord not connected), the sound will be monaural.

22

SEPARATE AUDIO

PROGRAM (SAP)

Your VCR is fitted with an SAP broadcast system which enables you to switch to a SEPARATE AUDIO PROGRAM when viewing a selected channel.

This function applies only when the program is broadcast in multi-languages through the SAP broadcast system.

CHECK BEFORE YOU BEGIN

•Turn ON the TV and set to the video channel 3 or 4.

•Turn ON the VCR POWER button.

•Press the TV/VCR selector button to select the VCR mode.

When a TV is connected with an audio/video cable, turn the TV and this VCR on, and select the video input mode on the TV.

1 Press the MENU button.		MENU
		CLOCK SET
		TIMER REC SET
Press the TRACKING/SET +		AUTO REPEAT	ON	OFF
or – button to select the SAP		CH SET UP	ON	OFF
		SAP
option.		LANGUAGE/IDIOMA/LANGUE
		NO NOISE BACKGROUND
2 Press the ENTER button to	〈+/–/ENTER/MENU〉		ON	OFF
		MENU
select the ON position.
		CLOCK SET
		TIMER REC SET
3 Press the MENU button again.		AUTO REPEAT	ON	OFF
		CH SET UP	ON	OFF
		SAP
		LANGUAGE/IDIOMA/LANGUE
		NO NOISE BACKGROUND
	〈+/–/ENTER/MENU〉		ON	OFF

LISTENING TO SAP

When the VCR is turned on or a channel selection is made, make certain "SAP" appears on the screen. This means that the "Separate Audio Program" broad- casting is available.

STEREO SAP SAP

OR

USING ZERO RETURN

The zero return function provides a convenient method of rapidly returning to the starting point of recording or playback. The starting point can be indexed for any location on the tape by pressing the COUNTER RESET button and ZERO RETURN button.

1Press the CALL button to display the counter on the screen. (When loading a cassette tape, the clock will change to the counter automatically in the display.)

2Before playback or recording, press the COUNTER RESET button to set the counter to "00:00:00".

3Begin playback or recording.

4Press the STOP button when playback or recording is finished.

5Press the ZERO RETURN button. The tape will rewind and automatically stop at the "00:00:00" position.

4E40401A E P20-25 22 4/1/01, 5:04 PM