Memorex MVR4041 owner manual ONE-TOUCH Timer Recording OTR, Setting the Timer Recording

ONE-TOUCH TIMER RECORDING (OTR)

The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording.

EXAMPLE: One-touch Timer Recording for 30 minutes.

CHECK BEFORE YOU BEGIN

•Turn ON the TV and set to the video channel 3 or 4.

•Turn on the VCR POWER button.

When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV.

SETTING THE TIMER RECORDING

Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.

EXAMPLE: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP).

CHECK BEFORE YOU BEGIN

• Turn on the TV and set to the video channel 3 or 4.

• Press the TV/VCR selector button to select the VCR

1	Load a cassette tape with the
	erase prevention tab intact.
	The clock display will change
	in the counter display.
2	Press the SPEED selector
	button to select the desired
	tape speed SP or SLP.

mode.

• Load a video cassette with the erase prevention tab

intact. The VCR will automatically turn on.

• Check that the clock and date are correct (see page 15).

When a TV is connected with an audio/video cable, turn the TV and this VCR on and select the video input mode on the TV.

The counter and SP or SLP

will appear on the screen for

about 4 seconds.

3 Press the direct channel

selection buttons or the

CHANNEL ▲ or ▼ button to

select the channel to be

recorded.

The channel number will

appear on the screen and

display for about 4 seconds.

4 Press the REC/OTR button to

begin recording. Press the

button again to stop recording

after 30 minutes. Each addi-

tional press of the REC/OTR

button will increase recording

time as shown in the chart

below, up to a maximum of 5

hours. The OTR and recording

time will appear on screen for

about 4 seconds.

00 : 00 : 00 SP

CH 125

OTR 0 : 30

CH 125

1	Press the MENU button.
	Check the TIMER REC SET
	option is selected, then press
	the ENTER button.
2	Press the TRACKING/SET + or
	– button to select one of the
	program line, then press the
	ENTER button.
3	Press the TRACKING/SET +
	or – button to select the date,
	then press the ENTER
	button.
4	Set the start time, end time,
	channel and tape speed as in
	step 3.
	NOTE: To record from external
	source set the channel
	to "L". "L" will appear
	next to CH 125 (or 69).
5	To enter other programs,
	repeat step 2 through 4. Or,
	press the MENU button twice

MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT	ON	OFF
CH SET UP	ON	OFF
SAP

LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND

〈+/–/ENTER/MENU〉ON OFF

DATE	START	END	CH
– – – – –	–: – –	–: – –	– – –
– – – – –	–: – –	–: – –	– – –
– – – – –	–: – –	–: – –	– – –
– – – – –	–: – –	–: – –	– – –
– – – – –	–: – –	–: – –	– – –
– – – – –	–: – –	–: – –	– – –
– – – – –	–: – –	–: – –	– – –
– – – – –	–: – –	–: – –	– – –

〈+/–/ENTER/CANCEL/MENU〉

DATE	START	END	CH	-
26(SU)	-:--	-:--	---
------	-:--	-:--	---	-
------	-:--	-:--	---	-
------	-:--	-:--	---	-
------	-:--	-:--	---	-
------	-:--	-:--	---	-
------	-:--	-:--	---	-
------	-:--	-:--	---	-

〈+/–/ENTER/CANCEL/MENU〉

NOTES: • Press the REC/OTR button to increase the time needed for recording (See the chart ).

•To cancel OTR, press the STOP button or turn off the power.

Press	Recording time
once	NORMAL REC
twice	0:30
3 times	1:00
4 times	1:30
5 times	2:00
6 times	3:00
7 times	4:00
8 times	5:00
9 times	NORMAL REC

to return to the normal screen.

6 Press the TIMER REC button.

The power will go off, the

TIMER REC indicator will

light and the VCR stands by

for recording.

To cancel timer recording, press the button again and the TIMER REC indicator will go out.

20

4E40401A E P20-25 20 4/1/01, 5:04 PM