Upgrades and Modifications

Removal of the cover - The cover cannot be removed. The circuits are potted in the chassis. There are no serviceable parts inside.

Installing or replacing the Input Modules - The modules are designed to be easily installed or replaced. Turn the DAC over and place on a soft surface like a towel. Please follow these instructions.

PLEASE note that the order the modules are installed is the priority order you will establish for automatic input selection. The highest priority input is located closest to the output connectors.

To remove a module, first remove the Phillips head screw in the jackpanel of the module.

Next remove the two screws on the bottom adjacent to the module.

Next remove the knurled screw from the base of the DAC. This is your removal tool. Screw it in hand tight into the back of the Input Module.

Then pull FIRMLY on the removal tool. Wiggle gently if needed. The module will slide out.