MSB Network Connector
The MSB PRO I2S Network
One of the most powerful features of MSB products is the PRO I2S network.
Most new MSB products have a PRO I2S connection available. The MSB PRO
I2S has the following capability:
•Works with standard CAT6 cable
•Simultaneous transmission of 8 audio channels with 32 bit resolution at 384 kHz sampling rate.
•MSB CAN Interbox communication Bus (for communications between boxes)
•Low Jitter master clock distribution from the DAC back to the Transport.
This network is our answer to 384 kHz audio transmission and multichannel transmission in the same package. We provide network outputs on our own transports and offer a source
upgrade to your transport as well. With multichannel sources, up to 8 channels of decoded data can be sent through one wire to separate DACs. CAT6 wire is very convenient as it has become the standard for all computer networks. Several cables are available for connecting MSB transports to the Platinum Line including CAT6 cable at any length up to 80 feet.
MSB NETWORK INPUT MODULE (BLACK FRONT)
This is an improved version of the classic MSB Network. It will work with all existing MSB Network outputs on all current and older products. This input is designed specially as the best possible input for the MSB Universal Media Transport. It has the performance of the stock MSB Network without the coupling of ground noise. With this input our transports will give the best possible results. It will work with the following:
•Data CD IV
•Universal Media Transport
•all older MSB products
It has 32 bit capability at up to 384 kHz. MSB Network Channel Select - The MSB Network supports 4 stereo channels of audio. Custom modules can be ordered to decode any of the 4 sets.
PRO I2S INPUT MODULE (GREEN FRONT)
The MSB PRO I2S is new and offers amazing performance on new transports as they are brought to market. It is lower jitter and higher speed (ready for 768 kHz music) than the MSB Network. It contains 20 channels of audio of 768 kHz, 32 bit in the I2S format, as well as a an outgoing clock and control data. These can be used to send multichannel data as would be required with digital crossovers, distribute independent super precision clocks and do auto setup of DAC parameters. Future upgrades and products will allow MSB products to take full advantage of these new capabilities. There is an PRO I2S output on our Studio 384 kHz, 32 bit ADC and this output will become the standard output on all new flagship MSB transports. So this input works with:
•MSB Pro
•Signature Data CD
•all new products to come
Input Module Operation
These new inputs are automatically detected and made available. There is nothing to setup or do.
7