Memorex DVR H264 Chap Operation, System Menu Configuration Password Setup, Factory Default

Network (JPEG2000+H.264)

Network Stand Alone DVR

CHAP. 4 Operation

4-1. System Log-In

1)To enter into the setup menu, press the [MENU] button.

2)Enter password with channel number button from No.1 to No.10 on the front of the DVR unit. (Maximum of 8 digits are available)

3)After inputting the password, press the [ENTER] button.

CHAP. 4 Operation

DVR LOG-IN

ENTER PASSWORD : _ _ _ _ _ _ _ _

INPUT YOUR OWN PASSWORD

TO EXIT, PRESS [MENU]

1	2	3	4	5
6	7	8	9	10

Administrator :

If the password entered matches previously set password, “ LOGIN ADMIN” message appears and you can enter into SYSTEM SETUP.

If the password entered does not match previously set password, the DVR unit goes back to live display mode.

Factory default password is blank. For log-in, just press [MENU] button and then [ENTER] button.

-Factory default password ADMIN : (Blank) MANAGER : ‘ 1 ’

USER 1~USER8 : ‘ 2 ’ ~ ’ 9 ’

※We recommend configuring a unique password as per the procedure in

SYSTEM MENU - CONFIGURATION - PASSWORD SETUP.

※For security reasons, be sure to make note of your own password.

4-2. Factory Default

Before first operation, you must check first if all connected camera images are displayed properly, and then login to the SYSTEM MENU. And you also need to set Time/Date, Factory Default, and then clear HDD. Even though it is brand new one. it is to make DVMR system and HDD ready for proper operation. Starting recording without FACTORY DEFAULT setting and HDD clear will cause malfunction.

1. FACTORY DEFAULT

DISPLAY SETUP

CONFIGURATION

REOCRD SETUP

BACK-UP

EXTERNAL DEVICE

FACTORY DEFAULT

LANGUAGE

2. HDD CLEAR

	HDD MANAGEMENT
DISPLAY SETUP	TIME/DATE SETUP
CONFIGURATION	CAMERA SETUP
REOCRD SETUP	INTERVAL SETUP
BACK-UP	ALARM SETUP
EXTERNAL DEVICE	EVENT POPUP SETUP
FACTORY DEFAULT	BUZZER SETUP
LANGUAGE	PASSWORD SETUP
	SYSTEM IMFORMATION

Refer to page 34. Refer to page 21.

13