Memorex DVR H264 user manual Key Release for PTZ function, Set preset

Network (JPEG2000+H.264)

Network Stand Alone DVR

•Key Release for PTZ function

poweron , lighton		"1"
poweroff, lightoff		"2"
iris open		"3"
iris close		"4"
focus near		"5"
focus far		"6"
zoom	in	"7"
zoom	out	"8"
setpreset		"9"
clearpreset		"0"
goto preset		"!"
auto scan		"@ "
tiltup		"u"
tiltdown		"j"
pan left		"h"
pan right		"k"

1) Set preset

CHAP. 9 Programmer reference

"&Z"

”Enter”

•To stop transmitting the signal to DVRs via RS232

"T“ → “U”, "J", "H", "K" (To move where you want to see) → "9"( set preset ) → "&Z“ ”Enter”

→"&+“ ”Enter”, ”&-“ ”Enter” (To set other preset point)

2)	Clear preset
"T“ → "0"		→ "&Z“ ”Enter”	→	"&+", "&-" (To choose which you want to delete )	→ “Enter"
3)	Goto preset
"T" → "!“		→ "&Z” ”Enter"	→	"&+“, "&-“ ( To choose where you want to see )	→
“Enter"

※Reference

1.Funtions where the OSD [xx] to the right of the function is not seen pressing "1" or "2" will bring it up.

2.Operations such as 'clear preset' take affect upon pressing the ‘0’ key causing the last preset to be deleted even though that may not be the desired action. Instead use the next key 'N' until 'clear preset' is up then choose the preset to be deleted followed by enter.

3.For units lacking a front panel jog shuttle the '15/F3' and '16/F4' ASCII front panel equivalent can be used.

67