Lindy 32592 user manual Troubleshooting, There is no picture on the display

Page 5

User Manual

English

Troubleshooting

There is no picture on the display.

Check the HDMI Switch Remote and all connected devices are correctly powered up and switched on.

Make sure all cables and connectors are correctly installed.

If a computer is connected, hit a key or move the mouse to wake it from power saving mode.

The HDMI Switch Remote does not respond to any commands from the remote control.

If present, remove the plastic tab labelled ‘Remove this tab’ that ships with the remote control.

Make sure you are in line of sight of the HDMI Switch Remote. Make sure that there are no obstructions which may be blocking the infra-red signal from the remote control.

Try switching channels using the push button to verify correct operation of the switch.

Ensure the battery is correctly installed in the remote control. Try a new battery (Type CR2025)

- 4 -

Image 5

Contents Hdmi Switch Remote Benutzerhandbuch Introduction Package ContentsFeatures Rear Panel Connections Front Panel Operation and Indicators Remote control sensorConnection & Operation There is no picture on the display TroubleshootingEigenschaften EinführungLieferumfang Vorderseite IR Sensor Fernbedienung Anschluss & BetriebRückseitige Anschlüsse Kein Bild auf dem TV/Projektor FehlersucheCaractéristiques Contenu de l’emballageConnexions Face Arrière Connexion & UtilisationPanneau frontal et indicateurs Capteur de contrôle distant Utilisation du contrôle distantIl n’y a pas d’affichage Problèmes rencontrésIntroduzione Manuale d’usoLa fornitura comprende CaratteristicheModalità d’uso Indicatori sul pannello frontale Sensore del telecomandoConnettori sul retro Funzioni del telecomandoNon si vede nessuna immagine sul display Soluzione dei problemiIl telecomando non riesce a comunicare con lo Switch FCC Warning Radio Frequency Energy, CertificationsFrance Recycling Information