Memorex Digital Video Disc Player Connecting the Player to a TV Using the Hdmi Output Jack

CONNECTING THE PLAYER TO A TV USING THE HDMI OUTPUT JACK

NOTES:
• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component,
	S-Video or Video OUT jack on the player.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
•	When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
	connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
•	because video discs are copy protected.
	When using HDMI as your source, setup the HD resolution in the Video menu as described on page 20 and the Digital Output
•	in the Audio menu as described on page 21.
	The player’s video output will automatically change to HDMI when the HDMI cable is connected and the power is on.

12