On-Screen Menu (continued)
DEINTERLACER SUBMENU (continued)
■Film Mode
Film mode uses specialized algorithms to correctly deinterlace content that originated in either 24fps or 25fps. Film Mode is automatically entered whenever a
Use the Film Mode setting to limit the film mode detection to a specific cadence.
• | Auto | Deinterlacer automatically identifies the film cadence |
• | 2:2 only | Deinterlacer only recognizes content originating in 25fps, and uses 2:2 film mode. 24fps content is ignored. |
• | 3:2 only | Deinterlacer only recognizes content originating in 24fps, and uses 3:2 film mode. 25fps content is ignored. |
■Film Indicator
Use the Film Indicator setting to enable or disable the film mode detection icon. If the Film Indicator is set to On, a green square will appear in the top left corner of the screen whenever a film cadence is detected. The Film Indicator can only be turned on only when the Deinterlacer Mode is set to Auto. It is normal for the Film Indicator to sporadically turn on and off, depending on the content.
■Motion Display
Use the Motion Display options to display
• | Off | Motion Display is off. |
• | Noise | Pixels which change value between fields are displayed as green. |
• | Motion | After a noise reduction filter, pixels which change value between fields are displayed as green. |
18