Remote Control, Vol | Memorex MT2327 manual

REMOTE CONTROL

POWER	TV	VCR	CABLE
1
1	2	3	CODE SET
4	5	6	CH ENTER
2
7	8	9	0

ENGLISH

*You can use these buttons to operate your VCR or Cable/Satellite box after you have programmed the remote control for the code that operates your VCR or Cable/Satellite box (see page 7).

VOL			VOL
	MUTING
		CH
MENU		SET	ENTER
RESET			RECALL
TV/CAP/TEXT	CH.1/2	TV/AV	QUICK VIEW
SLEEP			AUDIO SELECT
REW		PLAY	F.FWD
TV/VCR		STOP	PAUSE/STILL
REC		VCR CH

1.TV, VCR, CABLE POWER Button* - Used to turn the TV, VCR or Cable/Satellite box on or off after you

select the operating mode on step 9.

2.Direct Channel Selection Buttons (0-9)* - Allows direct access to any channel of the TV, VCR or Cable/ Satellite box.

3.CH (CHANNEL) ▲ / ▼ Buttons* - Used to change the channels of the TV or Cable/Satellite box.

4.MENU Button - Press to display the On-Screen menu function.

5.RESET Button - Press to reset the On-Screen picture adjustments to their factory preset positions.

6.CH.1/2 Button - Switches between Channel 1 and Channel

2in the Closed Caption mode.

7.TV/CAP/TEXT Button - Press this button to switch be- tween normal TV and the two Closed Caption modes (captions and 1/2 of full screen text). Closed Captioning will display text on screen for hearing impaired viewers.

8.SLEEP Button - To set the TV to turn off after a preset amount of time, press the SLEEP button on the remote control. The clock will count down 10 minutes each time the button is pressed in the order of 120, 110, 100, ······ 20, 10,

0.After the sleep time is programmed, the display will disappear then reappear momentarily every ten minutes to remind you the sleep timer function is operating. To confirm the sleep time setting, press the SLEEP button once and the remaining time will be momentarily displayed. To cancel sleep time, press the SLEEP button repeatedly until the display turns to 0.

9.TV, VCR, CABLE Selector Buttons - Press to select the TV, VCR or Cable/Satellite box to be operated.

10.CODE SET Button - Used to register the 2-digit codes to operate your VCR or Cable/Satellite box. Press this button and the VCR button or the CABLE button simultaneously to start a registration (See instructions page 7).

11.CH ENTER Button* - Press to input the selected channel of the VCR or Cable/Satellite box, in case your unit requires CH ENTER button.

12. VOL (VOLUME) / Buttons - Press the button to increase, or the / button to decrease the volume level.

13.MUTING Button - To turn off the sound, press this button once. The TV will be silenced and the symbol "MUTING" will appear on the screen. The muting feature can be released by pressing the MUTING button again or one of the VOL or / button.

14.SET + / – Buttons -Press to select the desired setting during On-Screen operations.

15.ENTER Button - Press to enter or select information for On-Screen operations.

16.RECALL Button - When you press this button, the channel number will appear on the upper right corner of the screen. Press the button again to remove display from the screen.

17.TV/AV Button - Switches between TV and external inputs.

18.QUICK VIEW Button - This button allows you to go back to the previous channel selected by just pressing the QUICK VIEW button. Press this button again to return to the channel you were watching.

19.AUDIO SELECT Button - Switches sound between mono, stereo, and SAP when receiving broadcasts in stereo or SAP.

20.VCR Operation Buttons* - Press to operate your VCR.

3M00201A-E

8/2/02, 2:13 PM