Marantz PMD910 manual Composite video out Connection, Component video out connection 480i/480p

ENGLISH

Composite video out Connection

Note

From the SETUP menu display, set the Progressive to OFF.

L	R
c

R L

			VIDEO	Y	CB / PB	CR / PR
		L
						COMPONENT
		R				EXTERNAL
			S-VIDEO
OPTICAL	COAXIAL				IN	OUT
		AUDIO	VIDEO			INTERNAL
DIGITAL OUTPUT		OUTPUT	OUTPUT		REMOTE CONTROL

c.Video/audio cable (accessory)

To audio input connectors on TV. (red, white) To video input connector on TV. (yellow)

Component video out connection (480i/480p)

Note

•If your TV has progressive (480p) video input, from the SETUP menu display, set the progressive mode to ON and also set the output mode to YCbCr.

•If your TV has interlace (480i) video input, from the SETUP menu display, set the progressive mode to OFF and also set the output mode to YCbCr.

•All HD TV are compatible with this player but some TV may cause artifacts in the picture.

•If you set progressive mode to ON [progressive scan mode], you can’t see the picture with your Analog TV or some digital TV. In this case, press stop button for 5 seconds of your remote controller then you can see the picture on the interlace mode with your TV.

	L R
d	e

R L

			VIDEO	Y	CB / PB	CR / PR
		L
						COMPONENT
		R				EXTERNAL
			S-VIDEO
OPTICAL	COAXIAL				IN	OUT
		AUDIO	VIDEO			INTERNAL
DIGITAL OUTPUT		OUTPUT	OUTPUT		REMOTE CONTROL

d.Audio cable (optional)

To audio input connectors on TV. (red, white)

e.Component-Video cable (optional)

To Component video input connectors on TV.

6