ENGLISH
Rear Panel
z x c v b | n |
|
|
| VIDEO | Y | CB / PB | CR / PR |
|
| L |
|
|
|
|
|
|
|
|
|
| COMPONENT |
|
| R |
|
|
| EXTERNAL |
|
|
|
|
| SERIAL NO. | |
OPTICAL | COAXIAL |
|
|
| IN | OUT |
|
| AUDIO | VIDEO |
|
| INTERNAL |
DIGITAL OUTPUT | OUTPUT | OUTPUT |
| REMOTE CONTROL | ||
m , .
z DIGITAL OUT (OPTICAL)
Connects digital audio under play mode into an AV amplifier or a receiver equipped with digital audio decoder for you to enjoy the
Note
•Remove the dust protection cap from the optical digital audio output connector and connect the cable firmly so that the configurations of both the cable and connector match.
•Do not connect to the digital audio input of an amplifier that does not have Dolby Digital and dts decoder when you set the digital out option of setup information to BITSTREAM.
x DIGITAL OUT (COAXIAL)
Connects digital audio under play mode into an AV amplifier or a receiver equipped with digital audio decoder for you to enjoy the
c AUDIO OUT
Analogue 2 channel (L/R) audio output in order to connect to a TV or stereo amplifier.
v VIDEO OUT
Connects composite video signal to Composite Video input con- nector of TV or monitor to achieve high fidelity colour reproduc- tion.
b COMPONENT VIDEO OUT (480i or 480p)
Connects component video signal to component video input connector on TV, if your TV supports interlace video input (480i) or Progressive video input (480p).
n AC in power cord connection terminal
Creates POWER between wall outlet and the unit.
m
Connects to TV or monitor equipped with
,System Control in / out jack
Connect this DVD player to another Marantz Component, to operate the components as a single system (page 9).
.System Control external / internal switch
When using this DVD player independently, set this switch to “INTERNAL” (page 9).
12