Marantz BD5004 manual Safety Precautions, Laser Safety, FCC Information For US customers, Product

Page 2

ENGLISH FRANÇAIS ESPAÑOL

The serial number of this product may be found on the back of the unit. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

The important note and rating are located on the rear or bottom of the cabinet.

Laser Safety

CAUTION:

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

FCC INFORMATION (For US customers)

1. PRODUCT

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.

2.IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by Marantz may void your authority, granted by the FCC, to use the product.

3.NOTE

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the product into an outlet on a circuit different from that to which the receiver is connected.

Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LAFICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

I

Image 2
Contents BD5004 FCC Information For US customers Safety PrecautionsLaser Safety ProductClass Laser Product  Copyrights / Droits d’auteur / Derechos de AutorContents Before Using Power SupplyInstallation Location Dew WarningCleaning Discs FeaturesSupplied Accessories About DiscsPlayable files Playable Discs and FilesPlayable discs Logos MediaWMA JpegAbout the Remote Control  Change the signal code of the unitChange the signal code of the remote control Rear Panel Introduction Part Names and FunctionsFront Panel Remote Control Adjusting the Brightness of the Display Front Panel DisplayExamples of Displays during Operation Display DescriptionVideo OUT/COMPONENT Video OUT Display device Connecting to a TVOthers RCAAudio Setting  Audio signals output from Hdmi OUTHdmi Output Mode and Actual Output Signals Disc type Audio recording Hdmi Audio Out setting FormatIntroduction  Audio signals output from Digital OUT CoaxialDigital Connection to an AV Amplifier with Built-in Decoder ConnectionsTelecommunications Network Connection with LANRCA audio cable L/R x No supplied cables are used in this connectionAC 120V, 60 Hz AC cord Connecting the AC cordAC outlet BD-V DVD-V DVD-VR Avchd  Turning the unit to the standby modeTurning the Power On Direct PlaybackBD-V DVD-V Avchd DVD-VRBD-V DVD-VMP3 WMA DivXRepeat Playback PIP Picture in Picture Bonusview SettingCD MP3 WMA Jpeg RepeatZoom DVD-V DVD-VR DivX JpegRandom Playback ClearBD-V DVD-V  Using H / G Using Search Mode  Marker searchMP3 BD-V DVD-V DVD-VR CD Avchd DivX  File name information Hdmi information  BD-V HD Audio Output BD-V DVD-V DVD-VR CD Avchd DivX MP3 WMA Mix Audio Output PlaybackWindows Media Audio/JPEG File Adjusting the PictureDescription Adjustment range Default setting BLU YELMP3 / Windows Media Audio Subtitle list will appearReading the SD Memory Card Inserting the SD Memory Card and playbackKodak Picture CD ModeConnections Setting the media Removing the SD Memory Card Enjoying BD-Live Discs with InternetQuick Using the Setup MenuCustom Setting items Options  Language  VideoProgressive Mode Hdmi RGB SettingHdmi Video Resolution Still ModeWall Paper BD Audio Mode Audio Hdmi Audio OutSetup Digital Out SettingSpeaker Setting FunctionChannel Level Menu Setting items Options DescriptionsSpeaker Configuration Ratings Proceed to a COthers Setting items Options DescriptionRating Explanations Hdmi CEC EnableCustom  IP Address SettingEnableEasy Network ConnectionNumber buttons Enter number  DNS Setting Proxy Setting Network Update  BD-Live SettingDisable Proxy PortInitialize Trademark Information Explanation of TermsDTS-HD BonusviewDTS HdcpPrimary Audio PCM Pulse Code ModulationPicture-in-Picture Progressive sequential scanningIndex Troubleshooting Problem SolutionLanguage Code Language CodeOthers SpecificationsSetup E5KB1UD / 1VMN27773A 07/2009 541110331126M mzh-d