Marantz DV9600 manual Video Adjust, Selecting a preset, Creating your own setting, Playing Discs

Playing Discs

Video Adjust

You can set the picture settings you desire and store them in the player’s memory.

Selecting a preset

1Press the VIDEO ADJ. button on the re- mote control.

2Select Memory Select.

3 Select a preset.

Press ENTER

•Standard – optimized settings for a standard television set

•Memo 1, 2, 3 – User presets (see below for more on these)

You can highlight a preset while a disc is playing (before you press ENTER to select it) to see the effect on the picture immediately.

Note

Depending on the disc and your TV/monitor, the effect of these settings may not be clear.

Creating your own setting

1Press the VIDEO ADJ. button on the re- mote control.

2 Select Setup.

3Use the cursor buttons (2/3) to select a

Memory (Memo1, 2, 3) to change/store a picture quality parameter.

4Use the cursor buttons (5/∞) to select a picture quality parameter, then use the cursor buttons (2/3) to adjust that parameter.

			VIDEO ADJUSTMENT
Setup	Memo1	Memo2	Memo3
Video	Progressive Motion		Min	Auto1
	DNR			Max
	CNR		Min	Max
	MNR		Min	Max
	BNR		Min	Max
	Sharpness High		Soft	Sharp
	Sharpness Mid		Soft	Sharp
	Detail		Soft	Sharp
	Brightness		Min	Max
	Contrast		Min	Max
		ENTER	RETURN	SETUP

•Progressive Motion – When using progressive scan, this adjusts the motion and still picture quality. There are three modes: Auto, Video, and Film. In Auto mode, the player automatically distinguishes film-source material and video- source material. Set to the Video mode when you know the program you are watching is from video-source material (such as animations).

Set to the Film mode when you know the program, you are watching is from film source material.

Auto 1: Standard setting

Auto 2: Setting for moving images

Auto 3: Setting for still images

Video 1: Standard setting

Video 2: Setting for moving images

Video 3: Setting for still images

30