Marantz DV9600 manual Additional Information, The disc containing the MP3 tracks won’t play

Page 64
The disc containing the MP3 tracks won’t play.

Additional Information

The disc containing the MP3 tracks won’t play.

•If the disc is a recordable CD, make sure that the disc is finalized.

Check that the track(s) are in the MPEG1 Audio Layer 3 format.

Check that the sampling rate of the track(s) are 44.1 or 48kHz.

Some MP3 tracks appear to be missing from a disc.

•If a track name does not end in “.mp3” or “.MP3”, this player will not recognize it as an MP3 track.

•This player only recognizes about 600 files on a disc. If there are more titles than this, you will not be able to play them.

•This player is not compatible with multi-session discs. If the disc is multi-session, you will only be able to play tracks recorded onto the first session.

The unit is connected to an HDMI/DVI component but the HDMI/DVI indicator on the display does not light.

•Set the input selector on the connected TV or HDMI/DVI component to this unit.

•This unit cannot be connected to TVs or HDMI/DVI components that do not support HDCP.

•Reset this unit and the TV or HDMI/DVI component by turning them off and on. (page 15)

No video appears on the connected HDMI/DVI component.

• Is the indicator V OFF shown on the display?

The unit will not output a video signal if the video output has been disabled. Enable the video output with the VIDEO ON/OFF button on the remote control.

•The unit will not output a video signal if the video output has been disabled in Pure mode.

•Can the connected TV or HDMI/DVI component use the selected resolution and format?

Set the Resolution and Format under HDMI Setup. (page 52)

•Set the input selector on the connected TV or HDMI/DVI component to this unit.

•Press the CLEAR button on the remote control for three seconds or more. This reverts the unit to its default settings. (page 15)

•TVs or HDMI/DVI components that do not support HDCP cannot output video from this unit.

No audio is coming from the connected HDMI component.

• Is the indicator V OFF shown on the display?

The unit will not output an audio signal if the video output has been disabled. Enable the video output with the VIDEO ON/OFF button on the remote control.

•The unit will not output an audio signal if a CD is played while the video output has been disabled in Pure mode. (page 51)

•The unit will not output an audio signal if Audio has been turned off under HDMI Setup. (page 54)

•Can the connected TV or HDMI component use the selected audio settings?

Set the Audio settings under HDMI Setup. (page 54)

•Some HDMI-compatible monitors do not support audio output.

•The unit will not output an audio signal if a DVI compo- nent has been connected.

•The unit will not output multi-channel or stereo audio signals from Super Audio CDs.

•The unit will not output audio from DVD-Audio discs with CPPM copyright protection if the HDMI-connected component does not support HDMI standard Ver. 1.1.

•The unit will not output audio from DVD-Audio discs that prohibit downmixing if 2ch PCM is selected.

•Audio is not output when i.LINK is connected because i.LINK has priority over HDMI. (page 55)

The unit does not output audio or video correctly when connected to a DVI component.

•Select HDMI OFF by pressing the HDMI/DVI RESOLU- TION button on the unit for three seconds or more. (page 13)

The unit is connected to an i.LINK component but the i.LINK indicator on the display does not light.

•Set the input selector on the connected AV amplifier to this unit.

•Reset this unit and the AV amplifier by turning them off and on.

The i.LINK indicator is lit but no audio is coming from the connected i.LINK component.

•Check that the audio setting for i.LINK is On. (page 55)

•Can the connected AV amplifier use the selected audio output format?

Set the Output Format under i.LINK Setup. (page 56)

•Set the input selector on the connected AV amplifier to the i.LINK input.

•Audio will not be output if the i.LINK-connected AV amplifier does not support the i.LINK AUDIO format.

•Audio will not be output if the i.LINK-connected AV amplifier does not support copyright protection (DTCP).

•Are all components between the AV amplifier and this unit turned on?

Signals cannot be transmitted if a component is turned off.

Auto Play does not work.

Select the AV amplifier you wish to link under the Auto Play setting. (page 56)

Multi-channel audio from a Super Audio CD or DVD-Audio disc is not output from the connected i.LINK component.

Select 5.1 channel from Audio Out under Audio Setup

1. (page 39)

64

Page 63 Page 65
Image 64
Page 63 Page 65
Contents Super Audio CD/DVD Player Model DV9600 User GuideCLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT Important Safety Instructions Copy protectionAdditional Safety Information CONGRATULATIONS ON YOUR PURCHASE OF THIS FINE MARANTZ PRODUCTPrecautions EnglishCAUTIONS FCC NOTE for U. S. AMaintenance of Cabinet Handling CautionsDisc Storage Operating EnvironmentTable Of Contents Connecting UpDVD Setup Menu Before You StartFeatures Before You StartHigh quality 14-bit/216MHz Video D/ A converter*2 dts 96kHz/24 bit compatibilityremote control Using the remote control1 Open the battery com What’s in the boxDiscs compatible with this player DVD-Video compatibilityDVD-Audio compatibility DVD-R compatibilityMP3 compatibility information DVD-Video regionsJPEG compatibility information Connecting Up Easy setupConnecting audio/video cables Connecting system control cablesConnecting S-Video cables Connecting HDMI cablesHome theater video connections S-Video or composite video?Connecting analog audio cables Connecting optical cablesConnecting coaxial cables Connecting i.LINK cables1 STANDBY indicator 6 POWER ON/OFF7 HDMI/DVI RESOLUTION Controls & DisplaysDisplay GRP TITLEi.LINK 27 Character displayRemote control OPEN/CLOSE - Disc tray open/closeVIDEO ON/OFF - press to turn video output off and on1 Switch the player on Getting StartedPlaying discs Basic playback controlsUsing the Disc Menu Using the Title MenuAnd also select Disc Menu using the MENU button on the remote control Navigating DVD disc menusUsing the Function Menu 1 Press the SET UP button during playbackPlaying Discs IntroductionUsing the INFO menu 1 During play, press the DISPLAY button on the remote controlFinding what you want on a disc 2 Use the cursor buttons 5/∞ to select the desired itemViewing a Pausing Picture Still Frame/Slow Play/Frame Advance PlaybackViewing slow playback Step Motion playback Viewing one frame at a timeMemorizing disc settings CONDITION MEMORY Using the PageTo recall memorized settings, just load the disc Using the Random Play 1 Press RANDOM during the Stop mode2 Press 3 PLAY to start random play Return to normal playbackUsing the Repeat Play Looping a section of a disc1 Press REPEAT during playback 3 Press ENTERUsing the Bookmark Function 1 During play, press the MARKER button on the remote controlBookmarking a place in a disc Recalling a Marked SceneMaking a program list 1 Press PROGRAM during the Stop mode3 Press 3 PLAY button 1 Delete all selections from program listSwitching Camera Angles Switching Subtitle LanguageTo display the camera angle, press ANGLE To display the subtitle language, press SUBTITLESwitching Audio Language Using the Zoom FunctionSwitching audio channel DVD-Audio Switching audio channel Video CDUsing Random Play Using Repeat PlayMP3/JPEG Play Playing MP3sPlaying JPEG CaptureVideo Adjust Selecting a presetCreating your own setting 2 Select Memory Select 3 Select a preset5 Press ENTER to save your changes. Note DVD Setup Menu Using the FL menuHP PROLOGIC setting REMOT CODE setting3 Press the ENTER button to access the sub features Using the Setup MenuENTER button Language Setup page Video Setup pageAudio Setup 1 page Parental Setup pageSetting up the Language Setup Using the OSD LanguageUsing the DVD Menu Language Using the Audio LanguageUsing the Subtitle Language 5 Press the cursor buttons 5/∞ to select EnglishSetting up the Audio Setup Digital OutDolby Digital Out DTS OutPCM Down Sample PCM Down SampleAudio Out About source audio outputSpeaker Size DistanceDefault setting Front L/R Large Center Default setting Unit Feet Distance 10 feetLevel RememberPress ENTER Press ENTER Cursor buttons 2/3 Speaker Change at manual test toneSuper Audio CD Mode Player ModeReplay DVD Audio as DVD Video? DVD replay method either DVD Audio or DVD VideoReplay DTS CD? CD replay settings CD Play BackDTS Down Mix either Stereo or Lt/RtAudio DRC TruSurroundSuper Audio CD Play SRS TruSurroundSetting up the Video Setup TV AspectWhen viewing on a widescreen TV or monitor This setting only has any effect withFull progressive outputThe picture is squashed. Set to either Pan & Scan or Letter Box The picture is squashed. Set your TV to ‘Full’Components Out Pause ModeBack Ground Screen SaverTV System MOD. Modulation PAL ShrinkSetting up the Parental Setup Use PasswordChange Password Enter your password again The Parental Control screen appearsSetting up the Others Setup On Screen DisplayAngle Mark Bonus GroupAuto Power Off Pure ModeEconomy Mode Pure Mode, Mode1 or Mode2 is selectedHDMI 1 Select Resolution2 Select Format 3 Select TV Aspect Setup Examples43 L - Box 43 Pan Scan 169 Wide 169 Squeeze 4 Select Audio HDMI Audio OutputMulti PCM 2ch PCM5 Select DVI Output i.LINK1 Select Audio Out 3 Select Output Format 2 Select Connections Select4 Select Auto Play About i.LINK To the Vieo inputi.LINK Network Copyright Protection System1. Daisy-chain connection 2. Tree tower connectionResetting the Player To reset the player, press and holdCleaning the pickup lens Problems with condensationAdditional Information Handling discsHints on installation Power cord cautionMoving the player Don’tTroubleshooting Settings are canceledThe disc is ejected automatically after loading Playback is not possibleThe remote control doesnt seem to work Noticeable difference in DVD and CD volumeCannot listen to high-sampling rate audio through the digital output No audio, or audio is distortedThe disc containing the MP3 tracks won’t play Some MP3 tracks appear to be missing from a discNo video appears on the connected HDMI/DVI component No audio is coming from the connected HDMI componentMeaning CorrectionAdditional Information i.LINK related display messagesSpecifications Additional Information is a registered trademark U.S.AMarantz America, Inc 1100 Maplewood Drive, Itasca, IL 60143, U.S.A
Top Page Image Contents