Marantz DV8300 Remote control, Random pages 29, Angle Last Memo, Clear Clear TOP Menu Search

Controls & Displays

Remote control

1

2

3

4

5

6

7

8

9

0

-

=

~

!

@

#

$

%

^

&

*

(

)

_

+

¡

™

£

1VIDEO ON/OFF – press to turn video output off and on (page 51)

2OPEN/CLOSE – Disc tray open/close

3 Number buttons – pages 21, 22

4 RETURN – Return

5 PROGRAM – pages 27, 38

6 SETUP – pages 17, 39

7 Joystick / ENTER button – page 22

8 7 – Stop

9 4 ¢ – Skip

10 8 – Pause

11 RANDOM – pages 29, 36

12 F.MEMO – Function memory (page 33) 13 VIDEO ADJ. – Video adjust (page 49) 14 DISPLAY – pages 34, 36

15 ANGLE – page 25

16 LAST MEMO – page 31

17 DIMMER – Press to change the display brightness

18 POWER – switches player on or into standby.

19 CLEAR – Clear

20 TOP MENU – page 22

21 SEARCH – page 23

22 MENU – page 22

23 3 – Play

24 1 ¡ – Scan

25 REPEAT — A-B – page 30

26 AUDIO – page 26

27 SUBTITLE – page 25

28 CONDITION MEMO – page 32

•This remote control supports two remote control codes: DVD1 and DVD2.

•When the unit is shipped from the factory, the remote control is set to DVD1.

•To set the remote control to DVD2, hold down both the “7 (Stop)” button and the “2” number button on the remote control for at least five seconds. (If the batteries in the remote control are replaced while the remote control is set to DVD2, the setting will revert to DVD1.)

•To set the remote control back to DVD1, hold down both the “7 (Stop)” button and the “1” number button on the remote control for at least five seconds.

•To check which remote control code is set at any time, hold down both the Stop and Pause buttons; the current setting (either “DVD1” or “DVD2”) will be displayed in the display window on the main unit.

•Also set the REMOT CODE on the FL menu to the same setting as the remote control. (This setting is set to DVD1 when the unit is shipped from the factory.) (page 16)

14