Marantz DV8300 What’s in the box, Putting the batteries in the remote control, Close the cover

Page 7

Before You Start

What’s in the box

Thank you for buying this MARANTZ prod- uct. Please confirm that the following accessories are in the box when you open it.

Remote control

AA/R6P dry cell batteries x2

Audio/Video cable (yellow/red/white)

System control cable

Power cable

These operating instructions

Putting the batteries in the remote control

1 Open the battery com- partment cover on the back of the remote control.

2 Insert two AA/R6P batteries into the battery compartment following the indications (ª, ·) inside the compartment.

3 Close the cover.

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

Don’t mix new and old batteries together.

Don’t use different kinds of battery together— although they may look similar, different batteries may have different voltages.

Make sure that the plus and minus ends of each battery match the indications in the battery compartment.

Remove batteries from equipment that isn’t going to be used for a month or more.

When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

1

Using the remote control

English

Keep in mind the following when using the

 

remote control:

Make sure that there are no obstacles between the remote and the remote sensor on the unit.

Use within the operating range and angle, as shown.

30

30

5m (17 feet)

Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the unit’s remote sensor.

Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit.

Replace the batteries when you notice a fall off in the operating range of the remote.

Note

When using this player independently, set a REMOTE CONTROL switch on the rear panel to INTERNAL. (page 10)

7

Image 7
Contents Model DV8300 User Guide For Canadian model Important Safety Instructions THX Table Of Contents Before You Start FeaturesUse within the operating range and angle, as shown Putting the batteries in the remote controlWhat’s in the box Close the coverDiscs compatible with this player MP3 compatibility information DVD Video regionsCD-ROM must be ISO 9660 compatible Connecting system control connections Connecting UpEasy Setup Connecting audio and video cablesHome theater video connections Connecting S-Video cablesVideo or composite video? Home theater audio connections Connecting analog audio cablesConnecting optical cables Connecting coaxial cablesDisplay Controls & DisplaysCharacter display Clear Clear TOP Menu Search Remote controlRandom pages 29 Angle Last MemoDisc tray Front panelDisplay Getting Started Using the FL menuSelect ‘Start’ Using the Setup NavigatorPress Power button on the front panel to switch on Press SetupSelect the type of TV you have Choose an OSD menu languagePress Setup to exit Select ‘Save Changes’ to make the settingsCongratulations, set up is complete Press 3to start playback Switch the player onPlaying discs Press OPEN/CLOSE to open the disc tray Load a discButton Basic playback controlsPress Menu Navigating DVD disc menusNavigating Video CD PBC menus Navigating DVD-RW discs menusPress Search repeatedly to choose between Playing DiscsIntroduction Finding what you want on a discViewing slow playback Viewing a still frameFrame by frame advance playback Viewing one frame at a time Current subtitle language is shown on-screen Switching camera anglesSwitching subtitles To switch the camera angle, press AngleTo set audio language preferences, see Switching audio languageSwitching audio channel To switch the audio channel, press Audio repeatedlyPress Program Making a program listEnter the title/chapter numbers for your program list Enter the track numbers for your program list Programming tipsDVD only Press Enter or 3to start random play Using random playPress Random repeatedly to select a random play mode Random Title/GroupTo resume normal playback, press Clear Tip Using repeat playPress Repeat during playback to select a repeat mode Looping a section of a discPress 7 if you want to stop playback here To resume playback, load the disc and press Last MemoIf the disc starts auto playback, stop it first Memorizing disc settings Condition Memory To delete an item from the shortcut menu Using setup menu shortcutsTo add a menu item to the shortcut list To use the shortcut menuDisplaying disc information To show/switch the information displayed, press DisplayPlaying MP3s Playing MP3sDisplaying MP3 information Displays when playingDisplays when stopped Searching for folders and tracksTotal number of Track Using the MP3 NavigatorMenu Exit the MP3 Navigator Use the number buttons to enter a three-digit track number Making a program list of MP3 tracksPress Program to enter the MP3 Program screen Use the number buttons to enter a three-digit folder numberDefault setting Expert DVD Setup MenuUsing the Setup menu Setup Menu ModeOn Screen Display OSD SettingsAudio settings OSD LanguageLinear PCM Out Default Dolby DigitalDolby Digital Out DTS OutVirtual Surround Mpeg OutDigital Out Sacd PlaybackAudio Out If you connected this player to your amplifier usingAbout source audio output Subwoofer SW can only be set to On or Off Speaker SettingThis setting does not apply to Sacd playback Sub On Surround Large Distance all 3.0mDefault setting Fix Gain SettingsCD Digital Direct Frame Search Video settingsTV Screen Video OutComponent Video BackgroundMemory 1, 2, 3 User presets see page 51 for more on these Selecting a presetSelect a preset You can also access these settings by pressing Video ADJSelect ‘Video Setup’ Creating your own settingPress Enter to save your changes Still Picture Angle IndicatorSelect ‘Video Setup’ Press Display Default setting AutoDefault Setting English Language settingsAudio Language Subtitle Language Subtitle LanguageFor Auto Language to work, the Audio Language Default Setting w/Subtitle LanguageAuto Language DVD LanguageSubtitle Off General settingsSetup Navigator Subtitle DisplaySetting/changing the Country Code Registering a new passwordChanging your password Setting/changing the Parental Lock levelPress Enter twice Auto Disc MenuBonus Group Group PlaybackAdditional Information Don’t Hints on installationPower cord caution Moving the playerGlossary Packed PCM DVD-Audio only Mpeg videoMulti-session Optical digital outputTroubleshooting No audio, or audio is distorted Some settings in the Setup Menu do not appearRemote control doesnt seem to work Picture disturbance during playback or darkCannot output 96kHz or 88.2kHz digital audio Cannot play multi-channel audioNo digital audio output Cannot output 192kHz or 176.4kHz digital audioTo reset the player, press and hold Resetting the PlayerLanguage code list Country Code ListAdditional Information When viewing on a standard TV or monitor General SpecificationsWe Want You Listening For a Lifetime Additional Information Is a registered trademark