Marantz DV8300 Using the Setup Navigator, Press Power button on the front panel to switch on

Getting Started 4

Using the Setup Navigator

Before playing any discs, we strongly recommend using the Setup Navigator. This makes all the basic DVD player settings for you.

1 Press POWER button on the front panel to switch on.

Also turn on your TV and make sure that it is set to the correct video input.

• The POWER button on the remote switches the player between standby and on.

• If a disc that’s already loaded starts to play, press 7to stop it.

Note

When it is required to remote control the power mode of this DVD player, be sure to leave this switch in the power on mode.

2Press SETUP.

The Setup Navigator on-screen display (OSD) appears:

Audio1 A2 Video1 V2 Language General

Setup Navigator

Setup Navigator	Start
	Auto Start Off
Setup using the Setup Navigator
Move	ENTER Select SETUP Exit

Navigate all of the following OSDs using these controls:

Joystick up/down – cursor up/down

ENTER – select the highlighted menu option

Joystick left – go back to the previous question.

The control possibilities for the current OSD are shown at the bottom of each screen.

English

3 Select ‘Start’.

Audio1 A2 Video1 V2 Language General

Setup Navigator

Setup Navigator	Start
	Auto Start Off
Setup using the Setup Navigator
Move	ENTER Select SETUP Exit

Remember

Press ENTER to select an option.

•If you decide you don’t want to use the Setup Navigator, select Auto Start Off here instead.

17