** | ** |
|
|
**
9. Software Update
1.If new software is found when powering on
1.A message will be displayed to notify that new software is found.
2.Select Yes and press the OK 
button to update the software.
3.Starts downloading new software. Please wait until the updated is completed.
4.When completing the software update, the equipment is automatically powered off and on again.
2.If updating software from Menu
1.Press the MENU 
button.
2.Select Installation using the 
button, and press the
OK 
or 
button.
3.Enter Password using the NUMERICAL
4.Select Software Update using the 
button, and press
the OK 
or 
button.
**
**
3. Automatic Update
You can set the product to find HUMAX software update site and update software automatically.
1.Select Automatic Update using the 
button, and
press the OK
or 
button. Automatically search for new software.
2.When detecting update software, the following result is displayed. If new software is not found by Automatic, use Manual Update.
3.Select Yes and press the OK 
button to start updating.
Select No and press the OK 
button to return to the previous menu without updating.
Select Later and press the OK 
button to update later. That means the update menu display as soon as you turn on the receiver next time.
4.When completing the software update, the product is automatically powered off and on again.
**
**
**
GB 58
**
**
**
**
**