B DISPLAY Setting
You can change the display functions. Follow steps 1 to in the “CUSTOM Menu” section on page 14.
Select the desired item.
ENTER
DISPLAY menu
SETUP | DISPLAY | |
|
|
|
TV ASPECT |
| 4:3 LETTER BOX |
STILL MODE |
| AUTO |
PROGRESSIVE | OFF | |
|
|
|
|
|
|
TV ASPECT:
•Select “4: LETTER BOX”, so that black bars may appear on the top and bottom of the screen.
•Select “4: PAN & SCAN” for a full height picture with both sides adjusted.
•Select “16:9 WIDE” if a
TV ASPECT: QUICK
(Default: 4:3 LETTER BOX)
See Hint on the left.
TV ASPECT | 4:3 LETTER BOX |
|
| TV ASPECT | ||
|
| 4:3 LETTER BOX | ||||
STILL MODE | AUTO |
|
|
| ||
ENTER | 4:3 PAN & SCAN | |||||
PROGRESSIVE | OFF | |||||
|
|
|
|
| 16:9 WIDE | |
STILL MODE: (Default: AUTO) See Hint on the left.
TV ASPECT | 4:3 LETTER BOX | STILL MODE | ||||
AUTO | ||||||
STILL MODE | AUTO |
|
|
|
| FIELD |
|
|
|
| |||
PROGRESSIVE | OFF |
|
|
|
| |
| ENTER |
| FRAME | |||
|
|
|
| |||
|
|
|
|
|
|
|
PROGRESSIVE: QUICK
(Default: OFF)
See Hint on the right.
TV ASPECT | 4:3 LETTER BOX |
| 4:3 LETTER BOX |
STILL MODE | AUTO |
| AUTO |
PROGRESSIVE | OFF |
| ON |
ENTER
Select the
desired ENTER setting.
ENTER
Select the desired
setting. ENTER
ENTER
SETUP
6 To exit
the TV ASPECT or STILL MODE screen
SETUP
To complete the PROGRESSIVE setting
ENTER
STILL MODE:
•Select “AUTO” usually.
•If you select “AUTO”, automati-
cally select the best resolution setting (FRAME or FIELD) based on the data characteristics of the pictures. (default)
•If you select “FIELD”, the picture in the still mode will be stabilized.
•If you select “FRAME”, the picture in the still mode will be highly defined.
•An individual picture on TV screen is called a “frame”, which consists of two separate images called as “field”.
•Some pictures may be blurred if you select “AUTO” in the still mode due to their date characteristics.
If there is no picture or you do not press any buttons for 15 seconds, Progressive scan will switch to “OFF” and it will exit the setup menu.
Before proceeding… |
|
| Select “Yes”. |
1. Make sure your TV has progressive scan. |
| ||
2. Connect with component video cable |
|
| |
NOTE: If there is no picture or picture is | ENTER | ||
distorted after selecting ‘YES’, |
| ||
wait about 15 seconds for auto recovery. |
| ||
Activate Progressive? | NO |
| |
|
| YES |
|
SELECT: K / L | SET:ENTER |
|
|
ENTER
Select “Yes”.
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
ENTER
NO
YES
SELECT: K / L SET:ENTER
PROGRESSIVE:
•You can set “PROGRESSIVE” to “OFF” in the DISPLAY menu or press and hold [PLAY B] on the front of the unit for more than 5 seconds during playback, so that the P- SCAN indicator on the front panel lights off.
•When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and
Functions
C AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to
in the “CUSTOM Menu” section on page 14.
Select the desired item.
ENTER
AUDIO menu
SETUP | AUDIO | |
|
|
|
DRC |
| ON |
DOWN SAMPLING | ON | |
DOLBY DIGITAL | BITSTREAM | |
|
|
|
|
|
|
5 DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DRC | ON |
|
|
| OFF |
DOWN SAMPLING | ON | ON | |||
DOLBY DIGITAL | BITSTREAM ENTER | BITSTREAM | |||
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC | ON |
|
|
|
| ON |
DOWN SAMPLING | ON |
|
|
|
| OFF |
|
|
| ||||
DOLBY DIGITAL | BITSTREAM |
|
| BITSTREAM | ||
ENTER | ||||||
|
|
|
|
|
|
|
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
•BITSTREAM: outputs a Dolby Digital Signals.
•PCM: converts the Dolby Digital into PCM (2 channel).
DRC | ON |
| ON |
DOWN SAMPLING | ON |
| ON |
DOLBY DIGITAL | BITSTREAM |
| PCM |
|
ENTER
6 To exit the menu
SETUP
DRC:
•This function is available only on the discs which are recorded in the Dolby Digital format.
DOWN SAMPLING:
•When playing back a 96kHz disc with the copyright protection, or when Virtual Surround is set to “1” or “2”, the sound will be down sampled at 48kHz and output as digital audio even if the “DOWN SAMPLING” is set to “OFF”.
•This function is available only on digital output- ting of a disc recorded in 96khz.
EN |