CONNECTING DEVICES TO THE COMPONENT INPUT TERMINALS
Connect the output of the device to the input terminals of the plasma display as shown in the following illustrations.
NOTE:
•When connecting a 480i input signal, connect it to COMPONENT 1.
•Cables shown here are not included with the plasma display.
•You can use COMPONENT 2 for 480i, 1080i (interlaced), 480p, 720p (progressive) video signals.
Component 1 Signal (Y, Cb, Cr) Connection (Best Signal Transfer)
480i (interlaced) signals can be connected to Component 1.
(Example: DVD Player)
R | L | Y | CB | CR |
3⋅RCA video cables
Y, Cb, Cr
AUDIO
2⋅RCA audio cables
TERMINALS
AU D I O 
R | L | Y | C b | C r |
COMPONENT 1 |
|
|
|
|
COMPONENT 2 |
|
|
|
|
R | L | Y | P b | P r |
Component 2 Signal (Y, Pb, Pr) Connection (Best Signal Transfer)
480i, 480p (progressive), 1080i and 720p (progressive) signals can be connected to Component 2.
NOTE:
You will select TV channels with the box that will be seen on the plasma display.
(Example: Set Top Box for DTV) | Antenna, cable, | |||
satellite signal | ||||
|
|
| ||
R | L | Y PB PR |
| |
AUDIO 
R | L | Y | C b | C r |
COMPONENT 1 |
|
|
|
|
COMPONENT 2 |
|
|
|
|
R | L | Y | P b | P r |
AUDIO
2⋅RCA audio cables
Y Pb Pr
EXTERNAL INPUT
19