SWITCHING EXTERNAL INPUT
When you connect external devices including a DVD player and home audio system, you can easily switch the input mode with the remote control.
POWER | SLEEP | INPUT |
SELECT |
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 | AUDIO |
| |||
|
|
| STILL |
- | 0 |
|
|
SETUP |
|
| SCREEN |
|
| MODE | |
|
| ENTER |
|
BACK |
|
| INFO |
| CH RETURN |
| |
VOL. |
| MUTE | CH |
1Switch the input mode.
•When you press [INPUT SELECT] or [CH
K/L] on the remote control, the input mode will be switched as below.
TV/DTV channel
Video1
Video2
Component1
Component2
HDMI
: press [CH K]
•To use the VIDEO1 or
•To use the VIDEO2 or
•To use the COMPONENT1 input jacks on the TV, select “Component1”.
•To use the COMPONENT2 input jacks on the TV, select “Component2”.
•To use the HDMI IN jack on the TV, select “HDMI”.
20
•When you press [INFO], the current external input mode, the type of resolutions for video signal, TV aspect ratio, CC and TV rating will be displayed at the
1) When using VIDEO1 or
Video1
480ii SD
2) When using VIDEO2 or S-VIDEO2 input jack
Video2
480ii SD
3) When using COMPONENT1 input jacks
Component1 
1080ii HD
NONE
4) When using COMPONENT2 input jacks
Component2 
1080ii HD
NONE
5) When using HDMI IN jack
HDMI
1080ii HD 16:9:9
NONE
•The information display will automatically dis- appear in one minute.
EN