Trouble Shooting
Problem Solution
Indicator light not blinking when you press any key
The remote does not operate your device
A)Replace the batteries (with fresh, new AAA Alkaline batteries).
B)Check that batteries are properly installed.
A)Try all the codes listed for your brand.
B)Try the Code Search method (page 8).
Not performing commands properly
Problems programming
a TV/VCR Combo Unit
VCR not recording
Channel up and down do not function on an
RCA TV
Problems chang- ing channels
No response after pressing a key
Start Code Search over again to locate the proper code.
Try the VCR code for your brand. Some combo units, however, may require both a TV and a VCR code for full operation.
As a safety feature on your remote, you must press the REC button twice.
Due to some designs, the original remote will only perform these functions.
If your original remote required ENTER after a chan- nel, press ENTER after you select a channel.
A)Make sure you have new batteries, and you are aiming your remote at your devices.
B)Check that batteries are properly installed. See page 2.
15