ENTER
The ENTER button is used to complete channel selection for some brands of TV. It is also used to complete the code entry process.
VOL & CHAN
The VOL (Volume) and CH (Channel) buttons increase or decrease channel numbers or volume.
MUTE
To MUTE the volume on the TV.
PREV CH
PREV CH allows you to go to the previous channel you selected. Operates the same as Last Channel, Go Back or Recall button on your original remote.
The number buttons operate the same as on your original remote, and are used for enter- ing device codes or channel numbers.
MENU
The MENU button calls up the TV and DBS set up menus.
Battery Installation
Your Universal Remote requires two (2) new AAA alkaline batteries. To install the batteries:
1.On the back of the remote, push and slide the cover off.
2.Match the batteries to the + and
- marks inside the battery case, then insert the batteries.
3.Press and slide the battery cover back into place.
Note: Programmed codes will remain in memory for a short period of time allow- ing for battery replacement. If batteries have been dead for a prolonged period of time, reprogramming may be required.
2