The DVD•AUX Button
The DVD•AUX button can be used for a DVD player. It can also be assigned to any other type of device (another TV, VCR, DVD, CD Player, or audio receiver).
1.Manually turn on the the device you wish to assign to the DVD•AUX button (TV, VCR or Cable Box or DVD Player).
2.Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button.
3.Press and release the DVD•AUX button. The
INDICATOR LIGHT will blink.
4.Find the three digit code for the device you wish to program in the code list Enter the code using the Number Buttons.
After your code is entered, the INDICATOR
LIGHT will turn off.
5.Aim the remote at your device and press the ON•OFF button. Your device should turn off.
Note: If your device does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8.
6.With your device on, press CH+. If the device responds, no further program- ming is required.
7.Enter your code here for easy reference.
7