Jasco RM24974 instruction manual Code Search, Setup button

Page 10

Code Search

If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps.

1.Manually turn on the device (TV, VCR, etc.) to be controlled.

2.Press and hold the SETUP button until the

red indicator stays on, then release the	SETUP
red indicator stays on, then release the
SETUP button.

3. Press and quickly release the desired device button (TV, VCR, etc.). The red indicator blinks off once.

4. Press the ON•OFF button repeatedly (up to 300 times) until the device

to be controlled turns off. The red indicator blinks off with each button press.

5.Press and release ENTER to install the code.

Most users will store VCR codes under the VCR button, Cable codes under CABLE, etc. If (for example) you want to store a VCR code under CABLE, first follow the procedure for Direct Code Entry (previous page) and press CABLE in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

Note: Code Search starts from the currently stored three digit number under that mode. Sometimes the first code that “works” with your device may only allow limited functionality (e.g. the MENU button might not work). There may be a code that performs more functions. Continue the code search process until the best code is found.

10

Image 10

Contents RM24974 Table of Contents Battery Saver SetupBattery Installation Code SetupSetup Used for setup Button FunctionsButton Functions, Onoff Turns Navigation buttonsAudio Button Descriptions Operating Audio FunctionsAudio Functions, Operating a CD player or Tape DeckDVR Operation Thumbs UP/DOWN page UP/DOWN To set TiVo Thumbs ratingsDirect Code Entry Setup button Code SearchUsing Your Remote Code IdentificationControlling Combo Devices Using Your Remote,Controlling Devices with Separate Power On and Off Buttons VCR/DVD Punch-ThroughVolume/Mute Control and Punch-Through Setting ALL Volume/Mute Control to any one ModeSetting any Mode to use its own Volume/ Mute Control Red Indicator blinks after you program a product code TroubleshootingRemote does not operate some features of your product Remote does not operate your productTabla de Contenido Instalación de las baterías ConfiguraciónConfiguración de códigos Ahorrador de bateríasVolume Arriba/Abajo Funciones de los botonesFunciones de los botones, continuación Descripción de los botones de audio Funciones de audioSistemas de teatro en casa Con reproductores de CD y grabadoras de caseteFunciones de sintonización AM/FM Función de sonido envolvente surroundPara los productos TiVo aplican los siguientes botones Operación DVRPara productos ReplayTV aplican los siguientes botones Entrada directa de códigos Búsqueda de códigos Presione y suelte Enter para instalar el códigoUso del control remoto Identificación de códigosControl de combinación de aparatos Uso del control remoto, continuaciónTraspaso de control en VCR/DVD Control y traspaso de control de volumen/silencio Suelte el botón Solución de problemas ¿Perdió sus códigos?Control Remoto Universal Manual de Instrucciones Garantía limitada de 90 díasDay Limited Warranty Universal Remote