Direct Code Entry
1. Press and hold the SETUP button until the SETUP red indicator stays on, then release the
SETUP button.
2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 3 digit code from the code tables (on separate sheet).
Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4.With your device on, press ON•OFF. If the device turns off, no further
programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.
Write your codes down here for easy reference later.
Type | Type stored | Code |
|
|
|
TV | TV |
|
DVR |
|
|
|
|
|
VCR |
|
|
|
|
|
CBL/SAT |
|
|
|
|
|
DVD |
|
|
|
|
|
AUDIO |
|
|
AUX |
|
|