Jasco RM24974 instruction manual Using Your Remote, Code Identification

Using Your Remote

Code Identification

The Code Identification Feature allows you to identify the three digit library code stored under your device button. For example, if you want to find out what three digit code is stored under your TV device button, follow the six steps below:

1.Press and hold the SETUP button until the red indicator stays on. Release the SETUP button.

2.Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit.

3.Press and release the SETUP button. The red indicator blinks once and remains lit.

4.To find the first digit for the code stored

under the device button pressed in step 2, press each numeric

button from 0-9in turn. The number that causes the indicator

light to blink is the first digit in your code.

5. To find the second digit, repeat step 4.

SETUP

SETUP

6.Repeat step 4 again to find the third digit. This time the red indicator turns off and stays off.

11