Fujitsu DL3800 manual Using Continuous, Forms

PAPER HANDLING

8. Load paper to the top-of-form position using either of the following methods:

• Load the paper manually. Press the LOAD button. The paper will advance to the top-of-form position. Adjust the position of the paper as needed by simultaneously pressing the ONLINE button and the LF/FF button or the TEAR OFF button (micro feed).

• Load the paper using your software. Press the ONLINE button to place the printer online. Load paper according to the instructions in your software documentation. Most software packages load paper automatically.

9. Place the printer online. Print a sample page and check the page margins. Make the following adjustments, as necessary:

• Horizontal alignment. Readjust the paper guides if required.

• Top-of-form setting (see Chapter 5).

• Margin settings. Use your software or the printer setup mode (see Chapter 5).

	Ejecting Single Sheets
	If you print using software, each sheet is ejected automatically when
	the end of the printed page is reached. To manually eject sheets of
	paper, use either of the following methods:
	• Press and hold down the LF/FF button to execute a forward
	form feed.
	• Turn the platen knob clockwise.
USING CONTINUOUS	Continuous forms paper, fanfolded at the horizontal perforations, is
FORMS	ideal for printing rough drafts and long files. The paper is fed into the
	printer using the forms tractors. If the forms tractors unit is mounted
	at the rear of the printer, it pushes paper from the rear to the platen.
	This is called push-tractor feeding. If the forms tractor unit is mounted
	at the top of the printer, it pulls paper from the bottom or rear of the
	printer to the platen. This is called pull-tractor feeding.

3-12 User's Manual