Fujitsu DL3800 manual Esc D Nul, Esc B Nul

COMMAND SETS

Function	Command
Change graphics line spacing base to	ESC [ \ (m1) (m2)
1/216 or 1/180 inch (for ESC J and ESC 3)	(t1) ... (t4)
m1 = 4, m2 = 0
0 ≤ t1 ≤ 255, 0 ≤ t2 ≤ 255, t3 = 0
t4 = 180 or 216
Tabulation
Horizontal tab execution	HT
Set horizontal tabs	ESC D (n1) ...
The values of n1to nk in this command	(nk) NUL
are the ASCII values of the print columns
(at the current character width) at which
tabs are to be set. (1 ≤ n ≤ 255) (1 ≤ k ≤ 28)
Clear all horizontal tabs	ESC D NUL
Move print position right by n/120 inch	ESC d (n1) (n2)
(0 ≤ n1, n2 ≤ 255) (n = n1 + n2 × 256)
Vertical tab execution	VT
Set vertical tabs	ESC B (n1)...
The values of n1to nk in this command	(nk) NUL
are the ASCII values of the lines (at the
current line spacing) at which tabs are to be
set. (1 ≤ n ≤ 255) (1 ≤ k ≤Ê 64)
Clear all vertical tabs	ESC B NUL
Reset tabs to default values	ESC R
Page Formatting
Set left margin at column n and right	ESC X (n) (m)
margin at column m (0 ≤ n, m ≤ 255)
Set perforation skip by n lines	ESC N (n)
(1 ≤ n ≤ 255)
Perforation skip off	ESC O
Set page length to n lines (1 ≤ n ≤ 255)	ESC C (n)
Set page length to n inches (1 ≤ n ≤ 22)	ESC C NUL (n)
Set top of form	ESC 4

Command Sets

User's Manual C-19