Fujitsu DL3800 manual Loading Continuous Forms Push Tractor and Rear Feed

PAPER HANDLING

Loading Continuous Forms (Push Tractor and Rear Feed)

This section explains how to use continuous forms as the tractor unit is installed at the rear of the printer. The tractor unit pushes continuous forms. This condition applies when you first purchase the printer.

You can use continuous forms paper even if you have a cut sheet feeder installed. However, we recommend that continuous forms paper be loaded before the feeder installed. To load continuous forms paper:

1.Make sure that the printer is turned on. Remove any single- sheet paper from the printer.

2.If necessary, readjust the paper thickness lever for continuous forms. (See the section Adjusting for Paper Thickness earlier in this chapter.)

3.Move the paper select lever to the rear of the printer.

Forms	Paper
tractors	select
	lever

Preparing to load continuous forms paper

3-14 User's Manual