Fujitsu DL3800 manual Select the Config function, Select an option, Exit the Config function

USING SETUP MODE

2.Select the CONFIG function.

Repeatedly press the LOCK button to position the red cursor under CONFIG. Press the FONT button to select the CONFIG function and print the following <TEAROFF> options:

<TEAROFF> MANUAL AUTO

3.Select an option.

Press the LOCK button to move the cursor to either MANUAL or AUTO. Press the FONT button to select the option and print the <TEARPOS> item. If other items must be specified, do so now. Otherwise, go to step 4.

4.Exit the CONFIG function.

Press the ONLINE button to exit the CONFIG function and reprint the <<FUNCTION>> menu.

5.Do either of the following:

•Select another function, or

•Exit setup mode, saving your changes.

For details on other functions, see the other sections in this chapter. To exit setup mode and save your changes, make sure that the red cursor is positioned under SAVE & END, then press the FONT button or the MENU button.

.

EXITING AND SAVING This section describes how to exit set up mode save any changes you made:

To exit setup mode immediately, select the SAVE & END function.

Setup Mode

User's Manual 5-43