Fujitsu DL3800 manual Vertical Control, Esc D

COMMAND SETS (ESC/P2)

Function	Command
Set character pitch to (n1 + n2 × 256)/360 inch	ESC c (n1) (n2)
(0 ≤ n1 ≤ 255) (0 ≤ n2 ≤ 4)
Select character pitch (specify unit o pitch)	ESC ( U (n1) (n2) (d)
n1 = 1, n2 = 0
d = 10 to 19: 10/3600 inch = 1/360 inch
d = 20 to 29: 20/3600 inch = 1/180 inch
d = 30 to 39: 30/3600 inch = 1/120 inch
d = 40 to 49: 40/3600 inch = 1/90 inch
d = 50 to 59: 50/3600 inch = 1/72 inch
d = 60 to 69: 60/3600 inch = 1/60 inch
Vertical Control
Line feed	LF
Form feed	FF
Advance paper n/180 inch (1 ≤ n ≤ 255)	ESC J (n)
Set line spacing to 1/8 inch	ESC 0
Set line spacing to n/180 inch (0 ≤ n ≤ 255)	ESC 3 (n)
Set line spacing to n/60 inch (0 ≤ n ≤ 127)	ESC A (n)
Set line spacing to 1/6 inch	ESC 2
Set line spacing to n/360 inch (0 ≤ n ≤ 255)	ESC + (n)
Tabulation
Horizontal tab execution	HT
Set horizontal tabs	ESC D
The values of n1to nk in this	(n1) ... (nk) NUL
command are the ASCII values of the
print columns (at the current character
width) at which tabs are to be set.
(1 ≤ n ≤ 255) (1 ≤ k ≤ 32)
Move print position n/60(*1) inch right from	ESC $ (n ) (n		)
left margin (n = n1 + n2 × 256)	1	2
Move print position n/120(*1) inch (for draft)	ESC \ (n ) (n )
or n/180(*1) inch (for letter) left or right	1	2
from the current position
(n = n1 + n2 × 256)
Vertical tab execution	VT

*1 This pitch is the default, but can be changed by the ESC ( U command beforehand.

C-24 User's Manual