Fujitsu DL3800 manual Resetting Defaults, Resetting Power-On Defaults

USING SETUP MODE

RESETTING DEFAULTS	This section describes how to reset the printer’s power-on defaults, all
	of the factory defaults, or the factory defaults only for MENU1 and
	MENU2.
	Resetting Power-On Defaults
	Power-on defaults are the settings saved in the printer’s permanent
	memory. The defaults are enabled whenever you turn the printer on.
	The easiest way to reset the power-on defaults is to turn the printer
	off and then on again. This method is useful if you have made
	changes in setup mode that you do not want to save.
	Resetting Factory Defaults
	Factory defaults are those settings preselected at the factory. For a list
	of the printer’s factory defaults, see the section Printing a List of
	Selected Options earlier in this chapter. To reset the factory defaults
	for all functions, proceed as follows:
	1. Turn off the printer.
	2. While pressing the LOCK, FONT, and MENU buttons, turn on
	the printer. Continue to press all three buttons until the
	printer beeps.
	The factory defaults are now reset.

Resetting Factory Defaults in MENU1 and MENU2

This method resets factory defaults for MENU1 and MENU2 options, listed in Table 5.3, but does not reset the printer hardware, print position adjustment, and configuration options. To reset the factory defaults in MENU1 and MENU2, proceed as follows:

Setup Mode

User's Manual 5-45