Fujitsu DL3800 manual Trouble-Shooting

TROUBLE-SHOOTING

Table 7.2 Paper Handling Problems and Solutions (Cont.)

Problem	Solution
Paper cannot be	If you are using a double-bin adapter, open the
loaded or fed.	front cover and make sure that the fourth stud
(continued).	from the left on the printer bottom frame
	projects.
Paper jams while	Turn off the printer and remove the jammed
loading.	paper. Remove any obstructions from the
	paper path.
	Make sure that the paper thickness lever is set
	for the thickness of your paper. See Table 3.2 in
	Chapter 3.
	If you are using a cut sheet feeder, make sure
	that the bin lever is set to the "CLOSED"
	position. (The bin lever is on the left side of the
	feeder.)
	Make sure that the paper is not folded, creased,
	or torn.
	Reload the paper.
Paper jams while	Turn off the printer and remove the jammed
printing.	paper. Remove any obstructions from the
	paper path.
	Make sure that the paper thickness lever is set
	for the thickness of your paper. See Table 3.2 in
	Chapter 3.
	For continuous forms, make sure that the
	incoming and outgoing paper stacks are
	correctly placed. Paper should feed straight.

shooting Trouble-

User's Manual 7-5