Fujitsu DL3800 manual 0BYTE option is recommended, Only for graphics application, Data

USING SETUP MODE

Table 5.4 HARDWRE Items and Options (Cont.)

NOTE: Underlined options are the factory defaults.

HARDWRE	Options	Description
Items
<BUFFER>		NOTE:
(continued)		• 0BYTE option is recommended
		only for graphics application.
		• With 128KB selected, the printer
		cannot accept any download font
		data.
<INTRFCE>		Selects the type of the interface to the
		computer.
	PARALEL	Centronics parallel interface
	SERIAL	RS-232C serial interface
	AUTO-2S	Auto interface selection mode
	AUTO-4S	• Both interfaces are ready for
	AUTO-6S	communication.
	AUTO-10S	• Specify the timing regarding the
	AUTO-15S	selected interface as being inactive.
	AUTO-20S

Serial Interface Items. The following <FORMAT> to <DUPLEX> items are not printed when you select the PARALEL option for the <INTRFCE> item. Be sure that the options selected on the printer are the same as the options selected using your computer operating system or your software. Refer to the documentation provided for your computer and software.

<FORMAT>

8NONE 1 8NONE 2 8EVEN 1 8ODD 1 7EVEN 1 7ODD 1 7MARK 1 7SPACE 1 7EVEN 2 7ODD 2

Number of		Number of
data bits	Parity bit	stop bits
8	None	1
8	None	2
8	Even	1
8	Odd	1
7	Even	1
7	Odd	1
7	Mark	1
7	Space	1
7	Even	2
7	Odd	2

The data format also includes a start bit. The mark is logical 1. The space is logical 0.

Setup Mode

User's Manual 5-31