Fujitsu DL3800 manual Paper Handling Problems and Solutions

TROUBLE-SHOOTING

Paper Handling Problems

Table 7.2 describes common paper handling problems and suggests solutions. See Chapter 3 for detailed procedures on loading and using paper.

Table 7.2 Paper Handling Problems and Solutions

Problem	Solution
Paper cannot be	Make sure that the paper select lever is set
loaded or fed.	correctly. Move the lever backward for
	continuous forms and forward for single sheets.
	Make sure that the paper covers the paper-out
	sensor, i.e., the left paper edge is within 52 mm
	for single sheets or 41 mm for continuous forms
	from the left edge of the platen. (This problem
	cannot occur if you use the forms tractor unit or
	insert a single sheet with its left edge in contact
	with the left paper guide.)
	Make sure that the tractor unit is correctly
	installed and that the tractor shaft gear engages
	the platen shaft gear. If you are using the
	tractor unit for rear feeding, open the front
	cover and make sure that the second stud from
	the left on the printer bottom frame projects.
	If you are using a cut sheet feeder, make sure
	that the bin lever is set to the "CLOSED"
	position. (The bin lever is on the left side of the
	feeder.)
	If you are using a cut sheet feeder, open the
	front cover and make sure that the third stud
	from the left on the printer bottom frame
	projects.

7-4 User's Manual