Fujitsu DL3800 manual × 256/360*1 inch

COMMAND SETS

		Function						Command
Set vertical tabs								ESC B (n1) ...
The values of n1to nk in this								(nk) NUL
command are the ASCII values of the
lines (at the current line spacing)
at which tabs are to be set.
(1 ≤ n ≤ 255) (1 ≤ k ≤ 16)
Move to dot line (d	1	+ d × 256)/360(*1) inch						ESC ( V (n	) (n	)
		2						1	2
n1 = 2, n2 = 0								(d1) (d2)
(0 ≤ d1 ≤ 255) (0 ≤ d2 ≤ 127)							× 256)/360(*1)
Vertical relative move by (d				1	+ d	2		ESC ( v (n ) (n )
								1	2
inch								(d1) (d2)
n1 = 2, n2 = 0
(0 ≤ d1 ≤ 255) (0 ≤ d2 ≤ 127)
–32768 ≤ d1 + d2 × 256 ≤ 32768
Page Formatting
Set right margin to column n								ESC Q (n)
(1 ≤ n ≤ 255)
Set left margin to column n								ESC l (n)
(0 ≤ n ≤ 255)
Set top and bottom margins from top of page								ESC ( c (n1) (n2)
n1 = 4, n2 = 0								(t1) (t2) (b1) (b2)
• Top margin =(t1 + t2 × 256)/360(*1) inch
(0 ≤ t1 ≤ 255) (0 ≤ t2 ≤ 127)
• Bottom marginÊ =(b			+ b	2	× 256)/360(*1) inch
		1
		(0 ≤ b1 ≤ 255)
		(0 ≤ b2 ≤ 127)
Set perforation skip by n lines								ESC N (n)
(1 ≤ n ≤ 127)
Perforation skip off								ESC O
Set page length to n lines (1 ≤ n ≤ 127)								ESC C (n)
Set page length to n inches (1 ≤ n ≤ 22)								ESC C NUL (n)
Set page length to (d1 + d2 × 256)/360(*1) inch								ESC ( C (n1) (n2)
n1 = 2, n2 = 0								(d1) (d2)
(0 ≤ d1 ≤ 255) (0 ≤ d2 ≤ 127)

*1 This pitch is the default, but can be changed by the ESC ( U command beforehand.

Command Sets

User's Manual C-25