Fujitsu DL3800 manual MENU1 and MENU2 Items and Options

USING SETUP MODE

Table 5.3 MENU1 and MENU2 Items and Options

NOTES:

•Underlined options are the factory defaults.

•Asterisks identify items and options that differ for the IBM XL24E and Epson ESC/P2 emulations. The notes are defined at the end of the table.

MENU1 and	Options	Description
MENU2 Items
<EMULATE>		Select the same emulation as is selected
		in your software. See the section
		Selecting an Emulation in Chapter 2 for
		information on selecting an emulation.
	DPL24C+	Fujitsu DL-series printers
		(DPL24C PLUS command set)
	XL24E	IBM Proprinter XL24E printers
	ESC/P2	Epson printers using the ESC/P2
		command set
		NOTE: When you change the
		emulation, all MENU1 or MENU2
		options are reset to the factory
		defaults for that emulation.
<FONT>		For each of the following fonts, the
		recommended pitch settings are given
		after the font name. When you change
		the font, be sure to also change the
		pitch, if required.
	COUR 10
	PRSTG12
	COMPRSD
	BOLDFCE
	PICA 10
	CORRESP
	OCR-B
	OCR-A
	COUR-N
	COUR-B
	COUR-I
	N.SAN-N
	N.SAN-B
	N.SAN-I

Setup Mode

User's Manual 5-15