Fujitsu DL3800 manual Width, Zerofnt, NO-SLSH Slash, Enable, Disable, CR-CODE CR only, Cr & Lf

USING SETUP MODE

Table 5.3 MENU1 and MENU2 Items and Options (Cont.)

NOTES:

•Underlined options are the factory defaults.

•Asterisks identify items and options that differ for the IBM XL24E and Epson ESC/P2 emulations. The notes are defined at the end of the table.

MENU1 and	Options	Description
MENU2 Items
<WIDTH>	13.6 IN	13.6-inch page width
(*6)	11.4 IN	11.4-inch page width
	11.0 IN	11-inch page width
	8.0 IN	8-inch page width
<ZEROFNT>		Specifies whether to print the number
(*3)		zero with a slash. This is useful to
		distinguish the capital letter “O”
		from the number “0”.
		Invalid for some soft fonts.
	NO-SLSH	0
	SLASH	/0
<DC3-CDE>	ENABLE	Enables the DC1 and DC3 codes.
(*5)		Any data received between DC3 and
		the next DC1 is ignored.
	DISABLE	Disables the DC1 and DC3 codes.
		These codes are then ignored.
<CR-CODE>	CR ONLY	No line feed is added to a carriage
		return.

CR & LF	A line feed is added to each carriage
	return.

Setup Mode

User's Manual 5-25