USRobotics V.34 user manual Dial security enabled

COURIER HIGH SPEED MODEMS

Register	Default	Function
S53	0	Bit-mapped register. Select the Dial
		Security features you want enabled by
		setting S53 to the total of the values in the
		Value column in the table below. For
		example, S53=3, enables Dial Security with
		prompting. S53=5 enables Dial Security,
		and local-access password protection. Or
		use ATSr.b=0 (OFF) or 1 (ON). For
		example, ATS53.0=1 .2=1 turns on bits 0
		and 2. To turn a bit off, set that bit to
		zero, as in ATS53.2=0.

		Bit	Value	Result
		0	1	Dial security enabled
		1	2	Prompting enabled
		2	4	Local-access password
				protection enabled
		NOTE: In addition, enabling local access
		password protection disables the &Zn=s
		command which stores up to ten phone
		numbers because stored phone numbers
		occupy the same space in NVRAM as the
		dialback numbers for Dial Security
		accounts.
S54	0	Symbol rate bit-mapped register used
		primarily by U.S.Robotics Technical
		Support for debugging purposes.

Bit 6 (ATS54.6=1) disables Call Indicate (CI).

Bit 7 (ATS54.7=1) disablesV.8.

Summaries and Tables B-27